| Issue ID | Description |
|---|---|
| CFD-13173 (03053176) | We resolved an issue where a scheduled scan did not run, even when a trigger condition existed. |
| CFD-13506 (03064391) | We resolved an issue where communication occurred between devices connected to an AP5020, with the Inter-station Traffic setting disabled. |
| CFD-13749 (03087413) | We resolved an issue where incorrectly displayed network health as 0/100 Poor. |
| CFD-13977 (03094885) | We resolved an issue where AP302W devices configured for a maximum power drop of 3dB, were dropping by 11dB. |
| CFD-14176 (03101888) | We resolved an issue where ExtremeCloud IQ ignored the RADIUS VLAN attribute when using PPSK with MAC authentication and user profile classification. |
| CFD-14224 (03097693) | We resolved an issue where neighboring APs chose the same 5GHz DFS channel when the SDR profile was enabled. |
| CFD-14289 (03123431) | We resolved an issue where AP410C devices experienced random high CPU usage spikes. |
| CFD-14436 (02916216) | We resolved an issue where an AP5010 repeatedly experienced an Unable to handle kernel paging request at virtual address 000103f4aa00040b error. |
| CFD-14956 (03154832) | We resolved an issue where wifi0 radio went down for AP5020 devices upgraded to 10.8.3 and was restored after downgrading to 10.8.2a. |
| HOS-23136 | We resolved an issue where beacon protection was not enabled for all 6GHz SSIDs. For example, if an SSID is on both the 5GHz and 6GHz bands and beacon protection is disabled on 5GHz, beacon protection is still mandatory for the 6GHz band. |