Addressed Issues in Release 10.9.1

CFD-17330

(03273228)

Addressed the issue where the show interface wifi command on AP5020 displayed inaccurate running average TX/RX channel utilization percentages when the interference map was enabled in the radio profile.

CFD-17265

(03275875)

Addressed the issue where the AP4000 did not respond to directed probe requests for hidden SSIDs on the Wi-Fi 6E (6 GHz) band.

CFD-17183

(03243636)

Addressed the issue where port-based 802.1X authentication using PEAP was not functional on 802.11ax APs running IQ Engine 10.8.5 and later.

CFD-17065

(03264578)

Addressed the issue where AP4000 devices running IQ Engine 10.8.5 and later failed to download captive web portal (CWP) files, complete configurations, and firmware images from the AFS server in network environments that did not permit TLS 1.3 connections.

CFD-17040

(03261495)

Addressed the issue where the Monitor > Clients view for an AP in ExtremeCloud IQ showed no client connection records when a time range beyond one day was selected.

CFD-17017

(03263775, 03240101, 03245697, 03271580, 03289423)

Addressed the issue where captive web portal (CWP) redirects did not occur on AP5020 when external CWP was configured through NAC.

CFD-16073

(03224570)

Addressed the issue where AP4000 devices experienced intermittent kernel panics, causing unexpected restarts.

HOS-25573

Addressed the issue where AP4020 devices with Winbond flash could not be downgraded from IQ Engine 10.8.7 to IQ Engine 10.8.5d.

HOS-25546

Addressed the issue where the show station command on the AP5020 displayed a positive RSSI value instead of a negative value for wireless clients connected to the wifi0 dual 6 GHz radio.

HOS-25474

Addressed the issue where Thread network dataset comparisons between DCD configuration and OTBR stored values triggered an unnecessary factory reset. Network key values no longer appear in error logs.

HOS-25466

Addressed the issue where, after disabling the wifi2 radio on an AP4020 with multiple MLO SSIDs configured, all MLO SSIDs stopped beaconing and only non-MLO SSIDs remained visible on-air.

HOS-25465

Addressed the issue where the log message ah_dcd_show_fa_map_db: get fa map db on iotgw failed appeared unnecessarily in AP logs.

HOS-25453

Addressed the issue where clients connected through the eth1 port of an AP4020 or AP5020 operating in client mode with NAT/DHCP disabled received an IP address but could not communicate with the client mode AP.

HOS-24525

Addressed the issue where disabling an MLO radio by shutting down its associated SSID on AP4020 and AP5020 caused the MLO session to go down completely instead of reconfiguring in dual-band mode.

HOS-23886

Addressed the issue where, on a WPA3-Enterprise Suite B 192-bit SSID, the AP initiated a full EAP authentication exchange on reassociation even when the client provided a valid PMKID in the reassociation request.