Routing

Software version 32.6.2.68 or newer is required.

To monitor IPv4 Routing information:

  1. Go to Manage > Devices and select a device.
  2. From the Device Details page, select Monitor > Monitoring > Routing.
    Note

    Note

    You can refresh the IPv4 Routing table by selecting next to the Last Polled time.
The following information is available from the Route Monitor Polling Graph:
  • A time range showing total number of routes within a 24 hour time period.
  • Route type counts:
    • Direct Routes
    • Static Routes
    • OSPF Routes
    • Total Routes
  • The Y axis resizes based on chosen routes.
  • The Y axis represents the total number of routes.
  • The X axis represents the poll time interval
  • Hovering over the graph displays a summary of routes with the given timestamp.
Note

Note

Select the graph heading to enable or disable the graph line view.
The following information is available from the IPv4 Routing table:
  • Destination Subnetwork
  • Next Hop
  • VLAN Name
  • VLAN ID
  • Route Origin
  • Status
  • Metric
  • Route Age
  • Route Type Priority
  • Routing Instance
You can filter for the Route Origin and Status.
Note

Note

Up to 100 IPv4 Routes are visible within the table. For additional visibility use an SSH proxy.
9038988-00 Rev AA