Clients

Clients Health

The Client Health page shows health information based on the sites and time ranges for the active clients on your network.

To access the information, go to Manage > Clients.

Data widgets display the following:

The Healthy and Unhealthy client lists display all associated client details. Use the Connection Type, OS Type, Connected Via, User Profile, and Status drop-down lists above the table to view real time or historical data.

Table 1. Client List Details
Column Description
Status

This column contains icons for each client, depending on the health of the connection.

  • Green indicates a healthy wireless connection.
  • Grey indicates that the client is not connected.
  • Red indicates that the wireless connection is in danger of failing.
  • Yellow indicates a poor-quality wireless connection.
Connection Type

Wired or wireless connection.

Host Name

The name of the device hosting the client.

SNR

If enabled APs consider signal-to-noise ratio to determine when to disassociate.

RSSI

The RF signal strength of the wireless link between the two neighboring devices. The RSSI range is 0-90.

Category Assignment (IoT only)

Operator-defined IoT category, such as printer, camera, thermostat, wireless client, and so on.

Channel Utilization The client channel utilization.
IPv4

The IPv4 address of the client.

MAC

The MAC address of the client.

Select the hyperlink to view the Client Connection Details Panel or to access the Client Tools menu.

User Name

The name of the user operating the client.

OS Type

The operating system running on the client as determined by the OS fingerprint. If the combination of requested DHCP parameters does not match an OS type in the client OS list, "unknown".

VLAN

The ID number of the VLAN to which the device assigned the client.

Connected Via

The port through which the client is connected.

User Profile

The user profile to which this client is assigned.

Select Download icon to download the table information in a .csv format.