This section provides the list of applicable port CLI commands.
interface gigabitEthernet <port-list> [no] encapsulation dot1q exit
interface gigabitEthernet <port-list> default-vlan-id <vid> exit
interface gigabitEthernet <port-list> [no] untag-port-default-vlan exit
interface gigabitEthernet <port-list> flex-uni enable exit
interface gigabitEthernet <port-list> [no] shutdown exit
interface gigabitEthernet <port-list> qos if-shaper shape-rate 234000 exit
interface gigabitEthernet <port-list> auto-sense enable exit