show ipsec-routes

Displays the IPsec routes configured on the Fabric IPsec Gateway Virtual Machine (VM).

Syntax

Command Mode

Fabric IPsec Gateway Configuration

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine Feature Support Matrix.

Example

The following example displays IPsec routes configured on the Fabric IPsec Gateway VM:

Switch:1> enable
Switch:1# virtual-service figw console
Connected to domain figw
Escape character is ^Y

  <cr>
FIGW> show ipsec-routes
192.0.2.30 via 192.0.2.20 dev eth0.125  mtu lock 1950
192.0.2.1/24 dev eth0.30  proto kernel  scope link  src 192.0.2.2
192.0.2.10 via 192.0.2.45 dev eth0.30
192.0.2.100/24 dev eth0.125  proto kernel  scope link  src 192.0.2.60
192.0.2.11/16 dev docker0  proto kernel  scope link  src 192.0.2.12 linkdown