Feature Pack Features

MACsec Platform Support

The ExtremeXOS software features are listed in the following table are managed as feature packs. Feature packs are distributed in one of the following forms:

In ExtremeXOS software (standard software component)—You must purchase a license to use the feature pack.
Modular software package (xmod file, due to.xmod filename extension)—You must request the xmod file from your supplier and install it.

For feature pack license and installation instructions, see Installing a Modular Software Package in the ExtremeXOS 30.2 User Guide.

ExtremeXOS Feature Pack Features

Feature Pack	Feature	Platform Support	XMOD Required
MPLS Feature Pack See MPLS Feature Pack.	MPLS LDP Static LSPs OSPF-TE MPLS label EXP bit replacement and classification RSVP-TE VPLS / H-VPLS for VLANs VPLS STP redundancy VPLS with ESRP redundancy VPLS with EAPS redundancy Fast Reroute (FRR) Support for PW counters User Virtual Routers L3VPN	Summit X460-G2 (with Advanced Edge license or higher), X670-G2, ExtremeSwitching X465, X590, X870, X690.	No
Network Timing Feature Pack See Network Timing Feature Pack.	Precision Time Protocol (PTPv2)	Summit X460-G2, X670-G2 switches.	No
AVB Feature Pack	Generalized Precision Time Protocol (GPTP) Multiple VLAN Registration Protocol (MVRP) Multiple Stream Registration Protocol (MSRP) Platform Support	All platforms, except the ExtremeSwitching X870 and X690, X590.	No
OpenFlow Feature Pack	OpenFlow	All platforms, except X465.	No
ExtremeSwitching X440-G2 10 Gigabit Port Licensing See ExtremeSwitching X440-G2 10 Gigabit Port Licensing.	10 Gigabit Port Licensing	ExtremeSwitching X440-G2.	No
ExtremeSwitching X870-96x-8c Switch Port Speed License See ExtremeSwitching X870-96x-8c Switch Port Speed License.	100 Gigabit Port Licensing	ExtremeSwitching X870-96x-8c.	No
MAC Security License See MAC Security Feature Pack License.	MAC Security licensing.	See MACsec Platform Support	No
Optics See Optics XMOD.	Optical transceiver support available outside of ExtremeXOS release cycle.	ExtremeSwitching X465, X590, X690, and X870.	Yes

Platform	Ports	LRM/MACsec Adapter Required?
Summit X460-G2-24p-24hp, X460-G2-24t-24ht switches	Half-duplex, 1G ports (25–48)	No
Summit X460-G2-24p-24hp, X460-G2-24t-24ht switches	All other SFP/SFP+ ports *	Yes
Summit X450-G2, X460-G2, X670-G2, and ExtremeSwitching X440-G2, X590, X620, and X690 series switches	SFP/SFP+ ports *	Yes
ExtremeSwitching X465	X465-24W: ports 1–24 X465-48T, X465-48P, X465-48W: ports 1–48 X465-24MU-24W: ports 25–48 VIM5-4XE: all 4 ports VIM5-4YE in X465-24MU, X465-24MU-24W switches: all 4 ports VIM5-4YE in X465-24W, X465-48T, X465-48P, X465-48W: first 2 ports only	No
Note: * For Summit X460-G2 series switches, the VIM-2X option does not support the LRM/MACsec Adapter.

Note

Starting with ExtremeXOS 21.1, Secure Shell 2 (SSH2) is no longer provided as a feature pack. It is incorporated into the main ExtremeXOS software image and is no longer provided as an XMOD. However, SSH2 contains strong encryption algorithms that heighten the export controls required in the US and other countries. When downloading the ExtremeXOS software image, you are required to verify that you meet the export clearance requirements. For more information, see Software Upgrade and Boot Options in the ExtremeXOS 30.2 User Guide.

For more information on SSH2, see Using Secure Shell 2 in the ExtremeXOS 30.2 User Guide.

Published May 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback