Use the data in following table to use the clear energy-saver eee stats command.

Clear Energy Efficient Ethernet (EEE) Statistics

About this task

Perform this procedure to clear information about Energy Efficient Ethernet (EEE) statistics for all ports on a switch, or for a specific port.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Clear Energy Efficient Ethernet statistics on all ports or specify a particular port:

    clear energy-saver eee stats [port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

Variable Definitions

Use the data in following table to use the clear energy-saver eee stats command.

Variable

Value
port

Specifies one or more ports.

{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
Identifies the slot and port in one of the following formats:

  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
9039040-00 Rev AB