Save Running Configuration to a File

About this task

Perform this procedure to save the current configuration on Fabric IPsec Gateway Virtual Machine (VM) to a specific file.

1. Enter Fabric IPsec Gateway Configuration mode:

   enable

   virtual-service WORD<1-128> console

   

   Note

   Type CTRL+Y to exit the console.

2. Save configuration to the default configuration file:

   save config [-y]

3. Save configuration to a specific file in the Fabric IPsec Gateway VM.

   save config file WORD <1-255> [-y]

Example

Save the Fabric IPsec Gateway configuration to file "test":

Switch:1> enable
Switch:1# virtual-service figw console
Connected to domain figw
Escape character is ^Y

  <cr>
FIGW>save config file test.txt
File already exists, do you want to overwrite [y/n]: y

Save the Fabric IPsec Gateway configuration to file "test", forcing the switch to overwrite the file without confirmation:

Switch:1> enable
Switch:1# virtual-service figw console
Connected to domain figw
Escape character is ^Y

  <cr>
FIGW> save config file test.txt -y