Variable Definitions

The following table defines parameters for the interface vlan command.

Variable

Value

<1-4059>

Specifies the VLAN ID.

The following table defines parameters for the interface GigabitEthernet command.

Variable

Value

{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:
  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

The following table defines parameters for the ip address command.

Variable

Value

<A.B.C.D/X>

Specifies the address and mask.