The following table defines parameters for the show nodealias protocol-info command.
Variable | Value |
---|---|
i-sid <0-16777215> |
Displays details for the specified I-SID. |
mac <0x00:0x00:0x00:0x00:0x00:0x00> |
Displays details for the specified MAC address. |
mlt <1-512> |
Displays details for the specified MLT. |
port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} |
Displays details for the specified port. |
protocol {bgp| ipv4|ipv6|udp|vrrp} |
Displays details for the specified protocol. |
vlan <0-4094> |
Displays details for the specified VLAN ID. |