Identifying the appliance

After the Data Center appliance with the 'SN122345' Serial Number (and its Model/Version information) has been automatically provisioned in the SD-WAN Orchestrator from the ZTP Server, as indicated via the sign, it appears under the 'Not Configured' tab of the Network -> Configuration window.

Proceed as follows to identify and further configure the appliance.

In the Network -> Configuration window, click

to edit the appliance.

In the Deployment Mode panel, select the Router option and hit the

icon to enable the related panels and functions of the interface.

In the General panel, enter the Name of the appliance as well as the name of the related Site.

Manually enter 65214 for the Local Autonomous System. It corresponds to the Autonomous System configured on the 11.1.4.251 router.

If you check the Auto option (not possible in the current Use Case), the related field is automatically populated with a number selected by the Orchestrator from the AS Number Range you have specified in the Overlay Routing panel of the Advanced Configuration window.

Through the Role field, define the appliance as a Hub since it identifies here a Data Center (receives tunnel requests). A spoke corresponds to a Site appliance (generates tunnel requests). Tunnels are always built from the spokes to the hub.

Since NATted DTI traffic is enabled on the WAN1 interface, select the Syslog Server you defined in "Advanced Configuration" to enable log export.

WAN Optimization is activated by default on this appliance if the matching license is available.

Also see how to identify:

a Branch Office appliance