List of Tunnels/Connections
Time Range Selector and Timeline for Alerts
|
1
|
Select a Time Range period by selecting it from the list : Last Day (default), Last Week, Last Month, Custom. |
|
2
|
According to the chosen time range, the Time Span selectors listed below are displayed at the right side of the Time Range Selector. Use these selectors to modify the time span of the displayed data: |
1hour, 2 hours, 4 hours, 8 hours, 24 hours, 1 day, 2 days, 7 days, 14 days, 30 days, 90 days
You can customize the time span by defining the date and time manually.
|
3
|
A Timeline evolution graph, showing Raised, Active and Cleared Alerts curves, corresponds to the chosen Time Range. Position you cursor over any point of the evolution curves to view the number of Alerts at a specific time. |
|
•
|
Click every curve label to either display or hide the curve. |
|
•
|
You can either show or hide the timeline. |
|
•
|
You can zoom the timeline curves by dragging your mouse over a specific time range; click  to return to the default time settings of the curves. |
|
4
|
Click  to reset the chart to its default time settings (Last Day, 24 hours). |
|
5
|
Click the Notification Rules button to configure alarm notification in order to be informed of the Critical, Warning and Information alarms that have been raised or cleared by ExtremeCloud SD-WAN. |
Tunnels - Overview
The Tunnels Overview table lists your network connections. You can filter displayed data by:
|
•
|
tunnel status (up, down or unknown) |
|
•
|
source site and destination site |
|
•
|
source appliance and destination appliance |
You can clear the defined filters at any time through 
. Use 
to refresh data display.
Click 
to download the table data as a Tunnel_Data.csv file.