Configure the Management Interface from the Inter-Cluster-Connect Port

Before you begin

Note

Note

The 1130C must be upgraded to the latest ExtremeCloud IQ firmware before installing the appliance on the network.
You will need a laptop.

About this task

You can retain the default IP address of the appliance Inter-Cluster-Connect (ICC) interface if you do not connect the appliance to your enterprise network. If you connect the appliance to your network, follow these steps:

Procedure

  1. Connect a laptop to the appliance's ICC1 port.
  2. Configure the Ethernet port of the laptop.
    Use a statically assigned unused IP address in the 192.168.10.0/24 subnet.
  3. Enter https://192.168.10.1:5825 into a web browser address bar.
    192.168.10.1 is the default IP address on the appliance ICC1 port.
    The Universal Compute Platform Login screen displays.
  4. Log on to Universal Compute Platform.
    The default user name is admin and the default password is abc123.
  5. Complete the installation to configure the 1130C appliance for new deployments.
  6. Disconnect your laptop from the appliance.
  7. Connect the appliance ICC port to the enterprise Ethernet LAN.
  8. Log on to the Universal Compute Platform.
    Note

    Note

    The system is now visible to the enterprise network. Refer to the Universal Compute Platform User Guide on the Extreme Networks Documentation Site for more information.
9038032-00   Rev AB