Display Dampened Routes Information
Display dampened path information to see which routes are suppressed.
Before you begin
-
To perform this procedure on a non-default VRF, you must first change the VRF instance. For information about how to use EDM for a non-default VRF, see Select and Launch a VRF Context View. All parameters might not be available in non-default VRFs.
-
The VRF must have an RP trigger of BGP.
-
Enable dampened routes.
Procedure
- In the navigation pane, expand .
- Select BGP.
- Select the Dampened Routes tab.
Dampened Routes Field Descriptions
Use the data in the following table to use the Dampened Routes tab.
|
Name |
Description |
|---|---|
|
IpAddrPrefix |
Specifies the IP address prefix in the NLRI field. This variable is an IP address that contains the prefix with a length specified by IpAddrPrefixLen. Bits beyond the length specified by IpAddrPrefixLen are set to zero. |
|
IpAddrPrefixLen |
Specifies the length, in bits, of the IP address prefix in the NLRI field. |
|
Peer |
Specifies the IP address of the peer from which the router learns the path information. |
|
FlapPenalty |
Specifies the penalty based on number of route flaps. |
|
FlapCount |
Specifies the number of times a route flapped (went down and up) since the last time the penalty was reset to zero. |
|
RouteDampened |
Indicates whether this route is suppressed or announced. |
|
ReuseTime |
Specifies the system-configured time for route reuse. |