The following table defines parameters for the clear nodealias command.
| Variable | Value |
|---|---|
|
isid <0-16777215> |
Specifies the I-SID. |
| mac <x00:0x00:0x00:0x00:0x00:0x00> |
Specifies the MAC address in hexadecimal format. The MAC address parameter does not accept MAC addresses beginning with 01:00:5e (01:00:5e:00:00:00 to 01:00:5e:ff:ff:ff inclusive). |
| mlt <1-512> |
Specifies the MLT ID. |
| port {slot/port[/sub-port]} |
Identifies a single slot and port. If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port. |
| vlan <0-4094> |
Specifies the VLAN ID. |