View Flap-Dampened Routes

Display information about flap-dampened routes to determine unreliable routes.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display information about flap-dampened routes:

    show ip bgp dampened-paths {A.B.C.D} [<prefix/len>] [longer-prefixes] [vrf WORD<1–16>] [vrfids WORD<0–512>]

Variable Definitions

The following table defines parameters for the show ip bgp dampened-paths command.

Variable

Value

{A.B.C.D}

Specifies the source IP address in the format a.b.c.d.

longer-prefixes

Shows long prefixes. The longer-prefixes indicate the mask length from a specified prefix to 32 (for example, show from prefix a.b.c.d/len to a.b.c./32).

<prefix/len>

Shows paths with this prefix. The prefix is the IP address and exact mask length (must be an integer value from 0–32).

vrf WORD<1–16>

Specifies a VRF instance by name (the string length ranges from 1–16 characters).

vrfids WORD<0–512>

Specifies a range of VRFs by ID number (the ID ranges from 0–512).
9039034-00 Rev AB