Variable Definitions

The following table defines parameters for the radius server host WORD<0-255> used-by {cli|eapol|endpoint-tracking|snmp|web} secure-log-level command.


Variable	Value
<critical \| debug \| error \| info \| warning>	Specifies the RADIUS secure server log severity level. The default is error.
used-by {cli\|eapol\|endpoint-tracking\|snmp\|web}	Configures how the server functions: cli - configures the server for CLI authentication. eapol - configures the server for Extensible Authentication Protocol over LAN (EAPoL) authentication endpoint-tracking - configures the server for Endpoint Tracking authentication snmp - configures the server for Simple Network Management Protocol (SNMP) accounting web - configures the server for web authentication
`WORD<0-113>`	Configures a host server. `WORD<0-113>` specifies the IPv4 address, IPv6 address, or fully qualified domain name (FQDN). If you use an FQDN, you must also configure the switch to use DNS.