View ZTP+ Status

About this task

Use this procedure to verify the status of Zero Touch Provisioning Plus (ZTP+) on the switch.

1. To enter User EXEC mode, log on to the switch.
2. Verify that ZTP+ is enabled:

   show application auto-provision

Example

The following is an example output of the show application auto-provision command:

Switch:1>show application auto-provision
=======================================================================
                              Auto-provision Info
=======================================================================
Operational Status       : Complete 
Configured Server Address: extremecontrol
extremecontrol IP Address: 192.0.2.34
Last successful sync     : Mon Sep 16 19:21:29 2024 EEST