Display the OVSDB Configuration

Use the following procedure to display the OVSDB protocol support for VXLAN Gateway configuration.

Procedure

To enter User EXEC mode, log on to the switch.
Display the OVSDB configuration:

show ovsdb config

Example

The following is an example of displaying the OVSDB configuration.

SWITCH:1>show ovsdb config
================================================================================
                               Ovsdb Config Info
================================================================================
                                Status - Enabled
                           Certificate - Installed
                           Private Key - Installed
               Replication Peer NLS-IP - 192.0.2.3
              Replication Local NLS-IP - 192.0.2.2

================================================================================
                         Ovsdb Controller Config Info
================================================================================
ID           Protocol             IP                        Port
1             ssl                 192.0.2.10                  6640