radius

Configure the switch to authenticate users identity through a central database.

Syntax

Command Parameters

access-priority-attribute <192-240>
Specifies the value of the Access Priority attribute. The default is 192.
accounting {attribute-value <192-240>|enable|include-cli-commands}
Enables Remote Dial-In User Services (RADIUS) accounting. The default is false.
auth-info-attr-value <0-255>
Specifies the value of the authentication-information. The default is 91.
ca-cert-file WORD<0-128>
Specifies the full path of the certification authority (CA) certificate file. Alternatively, you can specify the filename only, and the file is retrieved from the current directory.
cert-file WORD<0-128>
Specifies the full path of the server certificate file. Alternatively, you can specify the filename only, and the file is retrieved from the current directory.
clear-stat
Clears the RADIUS statistics.
cli-commands-attribute <192-240>
Specifies the value of the CLI commands attribute. The default is 195.
command-access-attribute <192-240>
Specifies the value of the command access attribute. The default is 194.
key-file WORD<0-128>
Specifies the full path of the private key file. Alternatively, you can specify the filename only, and the file is retrieved from the current directory.
key-pwd WORD<0-255>
Specifies the private key password for the RADSec profile.
maxserver<1-10>
Specific to RADIUS authentication. Sets the maximum number of servers allowed for the device. The default is 10.
mcast-addr-attr-value <0-255>
Specifies the value of the multicast address attribute in the range of 0 to 255. The default is 90.
secure-flag
Specifies whether RADIUS Security (RADSec) is globally enabled. The default is disabled.
secure-profile WORD<1-16>
Specifies the RADSec profile name.
WORD<1-128>
Specifies the name of the installed file.

Command Mode

Global Configuration

Usage Guidelines

The ca-cert-file WORD<0-128>, cert-file WORD<0-128>, key-file WORD<0-128>, key-pwd WORD<0-255>, secure-flag, secure-profile WORD<1-16>, and WORD<1-128> parameters are not supported on the VSP 8600 Series.