authentication-type

Configures the authentication-type filter for this user-defined role

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

authentication-type [any|eq|neq]

authentication-type any

authentication-type [eq|neq] [eap|kerberos|mac-auth|none] 
{(eap|kerberos|mac-auth|none)}

Parameters

authentication-type any


any	The authentication type is any (eq or neq). This is the default setting.

authentication-type [eq|neq] [eap|kerberos|mac-auth|none] 
{(eap|kerberos|mac-auth|none)}


eq [eap\|kerberos\| mac-auth\|none]	The role is applied only when the authentication type matches (equals) one or more than one of the following types: eap – Extensible authentication protocol kerberos – Kerberos authentication mac-auth – MAC authentication protocol none – no authentication used Note: These parameters are recursive, and you can configure more than one unique authentication type for this user-defined role.
neq [eap\|kerberos\| mac-auth\|none]	The role is applied only when the authentication type does not match (not equals) any of the following types: eap – Extensible authentication protocol kerberos – Kerberos authentication mac-auth – MAC authentication protocol none – no authentication used Note: These parameters are recursive, and you can configure more than one unique ‘not equal to‘ authentication type for this user-defined role.

Examples

nx9500-6C8809(config-role-policy-test-user-role-testing)#authentication-type eq kerberos

nx9500-6C8809(config-role-policy-test-user-role-testing)#show context
 user-role testing precedence 10
  authentication-type eq kerberos
  ap-location contains office
nx9500-6C8809(config-role-policy-test-user-role-testing)#

Related Commands


no	Removes the authentication type filter configured for this user-defined role