Configure a Bridge VLAN

Use this procedure to configure, edit, or delete a Bridge VLAN profile.

Choose from the following actions:
- If you are in the process of configuring a new Profile, go to Network > Bridge VLAN then proceed to the next step.
- If you want to edit or delete a Bridge VLAN profile, go to Profiles <select a device profile> Network > Bridge VLAN.
  
  Choose from the following actions:
  - To edit a Bridge VLAN profile, select adjacent to the target profile. Modify the profile in accordance with the steps in this procedure.
  - To delete a Bridge VLAN profile, select adjacent to the target profile.
Select to create a new Bridge VLAN profile.
Enter a numerical value (1 - 4094) in the VLAN field, then select Add.
Configure the parameters in the General, IGMP Snooping, and MLD Snooping tabs.
Select Add to create the new Bridge VLAN profile.
After you have completed configuring the settings, choose from the following actions:
1. Select Revert to restore default settings or restore the last saved settings.
  
  Note
  You cannot restore default settings after applying or saving changes.
2. Select Apply to commit the configured settings.
  
  Note
  This does not permanently save the settings you configured. If you perform a Reload (warm reboot), applied settings will be lost.
3. Select Save to commit and save the configured settings.
  
  Note
  
  If you do not select Apply or Save, the settings that you configured are not saved when you move away from the configuration window.

9037761-05 Rev AA