AP-8163 Grounding Post
The grounding post is located on the bottom of the Access Point above the
GND symbol.
![Warning](../../images/Warning_Note.png)
Warning
The grounding cable for an AP-8163 must be at a minimum a #10 gauge wire
cross section.
The grounding cable can be attached to the unit using one of the following methods:
- Use a grounding screw to securely attach the grounding cable to the grounding post. Use an
8mm socket and driver to tighten the grounding screw to 30 inch pounds (lbf-in).
- Attach a ring lug to the grounding cable and use a grounding screw to securely attach the
ring lug to the Access Point. Use an 8mm socket and driver to tighten the grounding screw to 30
inch pounds (lbf-in).