OBJECT
AccessControlMutations

GraphQL Schema definition

type AccessControlMutations {
#   Add an entry to a group. This does not do strict group type checking and should 
#   be used with caution.
# 
# Arguments
#   input: 
addEntryToGroup(input: BaseGroupAddEntryInput): AccessControlOutput 
#   Add hostname entry to an end-system group.
# 
# Arguments
#   input: 
addHostnameToEndSystemGroup(
input: GroupAddEntryInput
): AccessControlOutput 
#   Add IP address entry to an end-system group.
# 
# Arguments
#   input: 
addIPToEndSystemGroup(input: GroupAddEntryInput): AccessControlOutput 
#   Add an entry to a location group. The group and switches are required and 
#   interfaceType is optional and can be ANY, WIRED or WIRELESS.
# 
# Arguments
#   input: 
addLocationEntryToGroup(input: LocationGroupEntryInput): AccessControlOutput 
#   Add MAC address entry to the Blacklist end-system group.
# 
# Arguments
#   input: 
addMACToBlacklist(input: BlacklistAddEntryInput): AccessControlOutput 
#   Add MAC address entry to an end-system group.
# 
# Arguments
#   input: 
addMACToEndSystemGroup(input: GroupAddEntryInput): AccessControlOutput 
#   Add MAC addresses with optional descriptions to an end-system group. 
# 
# Arguments
#   input: 
addMACsToEndSystemGroup(input: GroupAddEntryListInput): AccessControlOutput 
#   Add a user or host group entry to a group. This is an attribute name and value 
#   pair entry.
# 
# Arguments
#   input: 
addUserGroupEntryToGroup(input: UserGroupEntryInput): AccessControlOutput 
#   Add username entry to a user group.
# 
# Arguments
#   input: 
addUsernameToUserGroup(input: GroupAddEntryInput): AccessControlOutput 
#   Create a new virtual and physical DCM network.
# 
# Arguments
#   input: 
createDCMVirtualAndPhysicalNetwork(
input: DCMNetworkInput
): AccessControlOutput 
#   Create a new access control engine and optionally add as network device.
# 
# Arguments
#   input: 
createEngine(input: EngineCreateInput): AccessControlOutput 
#   Create an access control engine group.
# 
# Arguments
#   input: 
createEngineGroup(input: EngineGroupCreateInput): AccessControlOutput 
#   Create an access control rule component group
# 
# Arguments
#   input: 
createGroup(input: GroupCreateInput): AccessControlOutput 
#   Lock an end-system MAC address to a switch and optionally to switch port.
# 
# Arguments
#   input: 
createMacLock(input: MacLockInput): AccessControlOutput 
#   Create a RADIUS server.
# 
# Arguments
#   input: 
createRadiusServer(input: RadiusServerInput): AccessControlOutput 
#   Create a switch or controller for Access Control engine group.
# 
# Arguments
#   input: 
createSwitch(input: SwitchInput): AccessControlOutput 
#   Delete all end-systems and optional related information.
# 
# Arguments
#   input: 
deleteAllEndSystems(input: EndSystemDeleteOptionsInput): AccessControlOutput 
#   Delete end-system and optional related information by MAC address.
# 
# Arguments
#   input: 
deleteEndSystemByMac(input: EndSystemDeleteByMacInput): AccessControlOutput 
#   Delete end-system information by mac address.
# 
# Arguments
#   input: 
deleteEndSystemInfo(input: SearchKeyInput!): AccessControlOutput 
#   Delete end-system information by ip address.
# 
# Arguments
#   input: 
deleteEndSystemInfoByIp(input: SearchKeyInput): AccessControlOutput 
#   Delete end-system information by mac address.
# 
# Arguments
#   input: 
deleteEndSystemInfoByMac(input: SearchKeyInput): AccessControlOutput 
#   Delete an access control engine and optionally remove as network device.
# 
# Arguments
#   input: 
deleteEngine(input: EngineDeleteInput): AccessControlOutput 
#   Delete an access control engine group.
# 
# Arguments
#   input: 
deleteEngineGroup(input: SearchKeyInput): AccessControlOutput 
#   Delete an access control rule component group
# 
# Arguments
#   input: 
deleteGroup(input: GroupDeleteInput): AccessControlOutput 
#   Delete local users by database id (long values) provided in comma separated 
#   string.
# 
# Arguments
#   input: 
deleteLocalUsersById(input: CSVStringInput!): AccessControlOutput 
#   Delete local users from a password repository by loginId (usernames) provided in 
#   comma separated string.
# 
# Arguments
#   input: 
deleteLocalUsersbyLoginId(
input: LocalUserCSVStringInput!
): AccessControlOutput 
#   Delete a mac lock by mac address.
# 
# Arguments
#   input: 
deleteMacLock(input: SearchKeyInput!): AccessControlOutput 
#   Delete a RADIUS server by IP Address
# 
# Arguments
#   input: 
deleteRadiusServer(input: SearchKeyInput!): AccessControlOutput 
#   Delete registered devices identified by properties.
# 
# Arguments
#   input: 
deleteRegisteredDevices(
input: RegisteredDevicesDeleteInput!
): AccessControlOutput 
#   Delete a registered user and any associated registered devices.
# 
# Arguments
#   input: 
deleteRegisteredUserAndDevices(
input: RegisteredUserInput!
): AccessControlOutput 
#   Delete registered users identified by properties.
# 
# Arguments
#   input: 
deleteRegisteredUsers(input: RegisteredUsersDeleteInput!): AccessControlOutput 
#   Delete a switch or controller from Access Control engine group by IP Address
# 
# Arguments
#   input: 
deleteSwitch(input: SearchKeyInput!): AccessControlOutput 
#   Download latest agentless assessment software to the management server.
# 
# Arguments
#   input: 
downloadAssessmentUpdates(input: AccessControlInput): AccessControlOutput 
#   Enable or disable the distributed end-system cache on an access control engine.
# 
# Arguments
#   input: 
enableEngineDistributedEndSystemCache(
input: EngineDistributedCacheInput
): AccessControlOutput 
#   Publish end-system events.
# 
# Arguments
#   input: 
endSystemEventPublish(input: EndSystemEventInput): AccessControlOutput 
#   Enforce and/or enforce audit to access control engines with options to 
#   reconfigure switches and/or captive portals. If no group or engines specified, 
#   will enforce all engines.
# 
# Arguments
#   input: 
enforceAccessControlEngines(input: EnforceInput): AccessControlOutput 
#   Enforce to all access control engines, and force reconfiguration of switches and 
#   portals.
enforceAllAccessControlEnginesForceSwitchesAndPortal: AccessControlOutput 
#   Hash password with provided hash type, where 0 is SHA1 non-reversible, 1 is 
#   PKCS5 reversible.
# 
# Arguments
#   input: 
hashLocalUserPassword(input: HashPasswordInput!): HashPasswordOutput 
#   Reauthenticate an end-system.
# 
# Arguments
#   input: 
reauthenticate(input: ReauthenticationInput): AccessControlOutput 
#   Remove a virtual and physical DCM network.
# 
# Arguments
#   input: 
removeDCMVirtualAndPhysicalNetwork(
input: DCMNetworkDeleteInput
): AccessControlOutput 
#   Remove an entry from a group.
# 
# Arguments
#   input: 
removeEntryFromGroup(input: GroupRemoveEntryInput): AccessControlOutput 
#   Remove a hostname entry from an end-system group.
# 
# Arguments
#   input: 
removeHostnameFromEndSystemGroup(
input: GroupRemoveEntryInput
): AccessControlOutput 
#   Remove an IP address entry from an end-system group.
# 
# Arguments
#   input: 
removeIPFromEndSystemGroup(
input: GroupRemoveEntryInput
): AccessControlOutput 
#   Remove an entry from a location group. The correct input field and value should 
#   be used to remove entry successfully.
# 
# Arguments
#   input: 
removeLocationEntryFromGroup(
input: LocationGroupEntryInput
): AccessControlOutput 
#   Remove a MAC address entry from the Blacklist end-system group.
# 
# Arguments
#   input: 
removeMACFromBlacklist(input: BlacklistRemoveEntryInput): AccessControlOutput 
#   Remove a MAC address entry from an end-system group.
# 
# Arguments
#   input: 
removeMACFromEndSystemGroup(
input: GroupRemoveEntryInput
): AccessControlOutput 
#   Remove a user or host group entry from a group. This is an attribute name and 
#   value pair entry.
# 
# Arguments
#   input: 
removeUserGroupEntryFromGroup(
input: UserGroupEntryInput
): AccessControlOutput 
#   Remove a username entry from  user group.
# 
# Arguments
#   input: 
removeUsernameFromUserGroup(
input: GroupRemoveEntryInput
): AccessControlOutput 
#   Save additional information about an end-system.
# 
# Arguments
#   input: 
saveEndSystemInfo(input: EndSystemInfoInput): EndSystemInfoOutput 
#   Save custom information for an end-system found by IP.
# 
# Arguments
#   input: 
saveEndSystemInfoByIp(input: EndSystemInfoCustomsInput): EndSystemInfoOutput 
#   Save custom information for an end-system found by MAC.
# 
# Arguments
#   input: 
saveEndSystemInfoByMac(input: EndSystemInfoCustomsInput): EndSystemInfoOutput 
#   Create or update a local user in a password repository.
# 
# Arguments
#   input: 
saveLocalUser(input: LocalUserInput!): AccessControlOutput 
#   Create or update registered device. Empty or missing fields will clear existing 
#   information on an update.
# 
# Arguments
#   input: 
saveRegisteredDevice(input: RegisteredDeviceInput!): AccessControlOutput 
#   Create or update registered device including sponsorship information. Empty or 
#   missing fields will clear existing information on an update.
# 
# Arguments
#   input: 
saveRegisteredDeviceWithSponsorship(
input: RegisteredDeviceInput!
): AccessControlOutput 
#   Update registered devices identified by properties.
# 
# Arguments
#   input: 
saveRegisteredDevices(
input: RegisteredDevicesPropertiesInput!
): AccessControlOutput 
#   Create or update registered user. Empty or missing fields will clear existing 
#   information on an update.
# 
# Arguments
#   input: 
saveRegisteredUser(input: RegisteredUserInput!): AccessControlOutput 
#   Update registered users identified by properties.
# 
# Arguments
#   input: 
saveRegisteredUsers(input: RegisteredUsersPropertiesInput!): AccessControlOutput 
#   Manually set the device type of an end-system identified by IP address which is 
#   managed by an access control engine.
# 
# Arguments
#   input: 
setDeviceTypeByIP(input: DeviceTypeByIPInput): AccessControlOutput 
#   Manually set the device type of an end-system identified by MAC address which is 
#   managed by an access control engine.
# 
# Arguments
#   input: 
setDeviceTypeByMAC(input: DeviceTypeByMacInput): AccessControlOutput 
#   Update assessment servers with latest agentless assessment software located on 
#   management server.
# 
# Arguments
#   input: 
updateAssessmentServers(input: IpArrayInput!): AccessControlOutput 
#   Update an access control engine. Includes changing engine group, overriding 
#   group engine settings.
# 
# Arguments
#   input: 
updateEngine(input: EngineUpdateInput): AccessControlOutput 
#   Update an access control engine group.
# 
# Arguments
#   input: 
updateEngineGroup(input: EngineGroupUpdateInput): AccessControlOutput 
#   Update an access control rule component group description
# 
# Arguments
#   input: 
updateGroup(input: GroupUpdateInput): AccessControlOutput 
#   Update a RADIUS server.
# 
# Arguments
#   input: 
updateRadiusServer(input: RadiusServerInput): AccessControlOutput 
#   Update a switch or controller for Access Control engine group
# 
# Arguments
#   input: 
updateSwitch(input: SwitchInput): AccessControlOutput 
#   Write end-system events from start date (milliseconds) to end date 
#   (milliseconds) to a file.
# 
# Arguments
#   input: 
writeEndSystemEventsToLogfile(
input: DateRangeInput
): AccessControlOutput 
}
Require by

MutationMutation root type
AccessControlMutations

link GraphQL Schema definition

link Require by

GraphQL Schema definition

Require by
