show auto-peering

Description

This command displays the status of BGP auto-peering and the learned auto-peering interfaces and corresponding remote peer information.

Syntax Description

This command has no arguments or variables.

Default

N/A

Usage Guidelines

All existing BGP show commands can be used to display the status of BGP peers and routes.

Example

The following example shows the status of auto-peering:

# show auto-peering bgp 
Type     : BGP
Password : 
Id       : 0              
Router ID: 2.2.2.102      
AS       : 102

Peer Id     Password 
----------- ----------------------------------
2222        None
2223        #$75Zvb3YfCBE/4+eSQE5dA5T2lmhF5A==

VLAN          Neighbor IP Address      Router ID       Remote AS  Port    Fabric ID  Peer  
------------- ------------------------ --------------- ---------- ------- ---------- -----
SYS_BGP_0002  fe80::204:96ff:fe9d:66e8 3.3.3.103       103        69      0          Yes

History

This command was first available in ExtremeXOS 22.5.

Peer ID and password information was added in ExtremeXOS 30.5.

Platform Availability

This command is available on the ExtremeSwitching X670-G2, X465, X590, X690, X870 series switches.

This feature requires the Advanced Edge license. For more information about licenses, see the ExtremeXOS 30.5 Feature License Requirements .