The Edge License includes all L2 Edge license features and the features in the following table.
ExtremeXOS Software Feature | Supported Platforms |
---|---|
CLEARFlow | All platforms that support the Edge, Advanced Edge, and Core licenses |
EAPS edge (4 max domains, single physical
ring) Note: You can increase the number of domains by upgrading to
the Advanced Edge license (see Advanced Edge License Features).
|
All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
GRE Tunnel Note: ExtremeXOS 15.4 and above supports creating a GRE-based IPv4
tunnel, and routing IPv4 traffic over it.
Note: In ExtremeXOS Release 15.5,
the following hardware is supported:
Note: From ExtremeXOS Release 15.6, the Summit X460-G2 and X670-G2
series is supported.
|
This feature is supported on all platforms that have GRE tunneling support. GRE tunnels are IP tunnels which require L3 Function. L3 features are supported with EDGE license and above. All of the supported platforms' default license is EDGE or above, which include L3 features. In a stack all of the nodes must be GRE capable. For GRE in a stack, allstack nodes must be GRE hardware capable. |
System virtual routers (VRs) | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
User-created Virtual Routers (VRs) Virtual Router and Forwarding (VRF) |
All platforms that support the Edge, Advanced Edge, and Core licenses |
VLAN aggregation | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
Multinetting for forwarding | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
UDP Forwarding |
All platforms that support the Edge, Advanced Edge, and Core licenses |
UDP BootP relay forwarding | All platforms that support the Edge, Advanced Edge, and Core licenses |
IPv4 unicast routing, including static routes | All platforms that support the Edge, Advanced Edge, and Core licenses.1. |
IPv4 multicast routing, including static routes Note: This feature has limitations in the Edge and Advanced Edge
licenses. See the ExtremeXOS 16.2 User Guide.
|
All platforms that support the Edge, Advanced Edge, and Core licenses.1. |
IPv4 Duplicate Address Detection (DAD) | All platforms that support the Edge, Advanced Edge, and Core licenses |
IPv6 unicast routing, including static routes | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
IPv6 interworking—IPv6-to-IPv4 and IPv6-in-IPv4 configured tunnels | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
IPv6 Duplicate Address Detection (DAD) without CLI management | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
IPv6 Duplicate Address Detection (DAD) with CLI management | All platforms that support the Edge, Advanced Edge, and Core licenses |
IP security:
|
All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
DHCPv4:
|
All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
DHCPv6:
|
All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
IP Flow Information Export (IPFIX) | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
Multi-Switch Link Aggregation Group (MLAG) | All platforms that support the Edge, Advanced Edge, and Core licenses |
Policy based routing (PBR) for IPv4 | All platforms that support the Edge, Advanced Edge, and Core licenses |
Policy based routing (PBR) for IPv6 | All platforms that support the Edge, Advanced Edge, and Core licenses |
PIM snooping Note: This feature has
limitations in the Edge and Advaned Edge licenses. See the ExtremeXOS 16.2 User Guide.
|
All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
Protocol-based VLANs | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
RIP v1/v2 | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
RIPng | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
Routing access policies | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
Route maps | All platforms that support the Edge, Advanced Edge, and Core licenses.1 |
SummitStack (switch stacking using native or dedicated ports) |
Summit X440-24p, X440-24t, X440-8p and X440-48p using dedicated SummitStack ports, X460 family switches, and E4G-400 with a SummitStack or SummitStack V-80 module. Summit X440-8t, X440-48t with dedicated SummitStack ports. Summit X440-24t-10G with ethernet ports. Summit X460-G2 with X460-G2-VIM-2SS optional card. Summit X480 family switches with a VIM2-SummitStack, VIM2-SummitStack-V80, or VIM2-SummitStack128 module. Summit X670V switches with a VIM4-40G4X module. |
SummitStack-V (switch stacking using dual purpose data ports) | See the specific models listed the "Support for Alternate Stacking Ports" section of the ExtremeXOS 16.2 User Guide. |
Python scripting | All platforms. |