Upgrade Extreme 9920 Firmware

Extreme 9920 firmware contains primary and secondary images. When a new Extreme 9920 firmware is installed, the image in the secondary location is removed and the image in the primary location is moved to the secondary location. The new image is installed in the primary location.

1. Update the Extreme 9920 firmware.
   

   system firmware update [ [ scp | sftp [://username:password@host[:port]/filepath] ] | [ htp | https [://[username:password@]host[:port]/filepath] ] ]

   • If the firmware update is successful, the system is rebooted automatically to activate the new version.

     The reboot reason is updated to RR_UPGRADE to indicate firmware update or rollback. The reboot reason is notified through chassis-0 property.

   • After reboot, all micro services are expected to come up. If the micro services come up, Firmware Rev property in chassis-0 component is published to State DB with the running firmware image.
   • If any of the micro services fail to come up within the specified duration, an automatic rollback to the previous image is triggered.
2. Optional: If the new firmware version is not required, rollback to the previous version.
   

   system firmware rollback