New In This Release

Extreme Fabric Automation 2.6.0 provides the following features and improvements.

Table 1. Features and Improvements
Feature Description
Non-Clos Topology: Dynamic ICL Describes procedure to configure dynamic Inter-Chassis Link (ICL) in small data centers.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

IP prefix list and route map features Describes procedure to configure IP prefix list and route map.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

IP prefix list and route map features Update the topic with Policy Service introduction.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

IP prefix list and route map features Updated the service list with Policy Service.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

BGP Peer: IP prefix list and route map Describes procedure to configure route map attributes.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

VRF: Advertise Address

VRF: Advertise Static-Network

VRF: Advertise Aggregate Address

Decribes procedure to configure Advertise Network, Static- Network and Aggregate Address on Tenant VRF.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

BGP Peer/Peer-Group: remove-private-as and default-originate Describes procedure to configure remove-private-as and default-originate on BGP Peer and Peer- Group.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

5-stage Clos Solution Validation Updated with 5-stage Clos fabric topology diagram.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

IP Pprefix list and route map features Updated the topic with Drift and Reconcile (DRC), Idempotency for IP prefix list and route map configurations.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

Support to configure BGP dynamic listen-limit value to '1024' from EFA Updated the topic with the BGP dynamic listen-limit value.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

EFA login to the switch with different user names triggering as a security violation on the switch Updated the topic with a step to install the certificates on devices.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

Multi Node: VIP hostname change failed to change log server on the device post completion Updated the topic with a note.

For more information, see the Extreme Fabric Automation Administration Guide, 2.6.0.

For more information, see Defects Closed with Code Changes.