Link Layer Discovery Protocol (LLDP) System Name Added to Show Output
The output of the show lldp neighbors command now shows the system name.
Supported Platforms
Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X620, X440-G2 series switches.
Changed CLI Commands
The following is the revised output of the show lldp neighbors command:
# show lldp neighbors =============================================================================== Neighbor Neighbor Neighbor Port Chassis ID Port ID TTL Age System-Name =============================================================================== 1:2 00:04:96:99:8C:31 1:23 120 7 Not-Advertised 11:123 FF:FF:FF:FF:FF:FF FF:FF:FF:FF:FF:FA 65535 65535 Extreme-440-G2 1:21 02:04:96:9A:30:BF 2:27 120 27 Extreme-460-G2-Stac k-switch 1:27 02:04:96:9A:30:BF 2:27 120 0 Vaishnaviv123456789 0123456789012345678901234567890123456789012345678901234567890123456789012345678 9012345678901234567890123456789012345678901234567890123456789012345678901234567 890123456789012345678901234567890123456789012345678901234567890123456789012345 ===============================================================================