Default ExtremeXOS Settings shows the default settings for ExtremeXOS starting with version 22.6, and shows any changes that have been made to these settings and in what version these changes were made.
| ExtremeXOS Feature | 22.6 Settings | 30.1 Settings | 30.2 Settings | 30.3 Settings | 30.5 Settings | 30.6 Settings | 30.7 Settings |
|---|---|---|---|---|---|---|---|
| Account Lockout | After 3 consecutive login failures, account is locked for 5 minutes. #GUID-DB53083D-D9CB-4467-8B4D-B4E45D6F0777__A | ||||||
| AVB | Disabled. | ||||||
| BFD Strict Session Protection | N/A. | N/A. | Disabled. | ||||
| BGP | Disabled. | ||||||
| Bluetooth | N/A. | N/A. | Enabled. | ||||
| BOOTP Relay | Disabled. | ||||||
| CDP | Enabled. | ||||||
| Configuration auto save | Disabled. | ||||||
| Clear-flow | Disabled. | ||||||
| Diagnostics | Admin level privileges required to show diagnostics. #GUID-DB53083D-D9CB-4467-8B4D-B4E45D6F0777__A | ||||||
| DHCP | Disabled. | Extreme IQ agent, enables DHCP on VR-Mgmt. See ExtremeCloud™ IQ Agent Support. | |||||
| DNS Cache Resolver and Analytics | N/A. | N/A. | Disabled. | ||||
| IPFIX | Disabled. | ||||||
| EAPS | Disabled. | ||||||
| EDP | Enabled. | Enabled on management port. | |||||
| ELRP | Disabled. | ||||||
| ESRP | Disabled. | ||||||
| Extended Edge Switching (VPEX) | Disabled. | ||||||
| Identity Management | Disabled. | ||||||
| IGMP | Enabled, set to IGMPv2 compatibility mode. | ||||||
| IGMP Snooping | Enabled. | ||||||
| IP Route Compression | Enabled. | ||||||
| ISIS | Disabled. | ||||||
| Log | Admin level privileges required to show log. #GUID-DB53083D-D9CB-4467-8B4D-B4E45D6F0777__A | ||||||
| Logging memory buffer | Generate an event when the logging memory buffer exceeds 90% of capacity. #GUID-DB53083D-D9CB-4467-8B4D-B4E45D6F0777__A | ||||||
| MAC Security | N/A | Disabled. | |||||
| MLD | Disabled. | ||||||
| MLD Snooping | Disabled. | ||||||
| MPLS | Disabled. | ||||||
| MSRP | Disabled. | ||||||
| MSTP | Enabled. | ||||||
| NetLogin | All types of authentication are disabled. | ||||||
| NTP | Disabled. | ||||||
| ONEPolicy | Disabled. | ||||||
| Policy rule model | Access list (Unless upgrading to 30.5 with existing policy rules configuration, then the default is hierarchical. | Hierarchical (Unless upgrading from 30.5 with a saved configuration set to access list.) | |||||
| OpenFlow | Disabled. | Not supported. | |||||
| OSPF | Disabled. | ||||||
| OVSDB | Disabled. | ||||||
| Passwords | Plain text password entry not allowed. #GUID-DB53083D-D9CB-4467-8B4D-B4E45D6F0777__A | ||||||
| PIM | Disabled. | ||||||
| PIM Snooping | Disabled. | ||||||
|
PoE Fast PoE Perpetual PoE |
Enabled. N/A. N/A. |
Enabled. Disabled. Disabled. |
|||||
| RADIUS | Disabled for both switch management and network login. | ||||||
| RIP | Disabled. | ||||||
| RMON | Disabled. However, even in the disabled state, the switch responds to RMON queries and sets for alarms and events. | ||||||
| sFlow | Disabled. | ||||||
| SNMP server | Disabled. #GUID-DB53083D-D9CB-4467-8B4D-B4E45D6F0777__A | ||||||
| SSH | Disabled. | ||||||
| Stacking | Disabled, except for X450-G2. | — | Disabled, except for X450-G2, X465. | — | — | ||
| Stacking auto-discovery | N/A. | N/A. | Enabled. | ||||
| STP | Enabled. | ||||||
| Syslog | Disabled. | ||||||
| TACACS | Disabled. | ||||||
| Telnet | Disabled. #GUID-DB53083D-D9CB-4467-8B4D-B4E45D6F0777__A | ||||||
| VPLS | All newly created VPLS instances are enabled. | ||||||
| Watchdog | Enabled. | ||||||
| Web HTTP server | Disabled. #GUID-DB53083D-D9CB-4467-8B4D-B4E45D6F0777__A |