Resolved Issues in ExtremeXOS and Switch Engine 31.7-Patch1-36

The following issues were resolved in ExtremeXOS 31.7-Patch1-36. Release 31.7-Patch1-36 includes all fixes up to and including the following versions: 11.6.5.3 and earlier, 12.0.5, 12.1.7, 12.2.2-patch1-12, 12.3.6, 12.4.5, 12.5.5, 12.6.3, 12.6.5, 12.7.1, 15.1.5, 15.2.4, 15.3.3, 15.4.1, 15.5.1, 15.5.2, 15.6.1, 15.6.2, 15.7.1, 16.1, 16.1.2, 16.1.3, 21.1, 22.1, 22.2, 22.3, 22.4, 22.5, 22.6, 30.1, 30.2, 30.3, 30.4, 30.5, 30.6, 30.7, 31.1, 31.2, 31.3, 31.4, 31.5, 31.6, and 31.7. For information about those fixes, see the release notes for the specific release.

Release 31.7 also includes fixes for issues found in Switch Engine 31.6. Release 31.6 was the first version of Switch Engine.

Table 1. Resolved Issues, Platform-Specific, and Feature Change Requests (CRs) in 31.7-Patch1-36
Defect Number Description
General
EXOS-30094 The footer should be printed without consideration of CLI paging.
EXOS-30566 VLAN-based mirroring stops working if any port on the switch is partitioned.
EXOS-31711 Remove the default IP from the tech-support collector.
EXOS-31786 UDP profile doesn't forward traffic to /30 network if the switch interface has the same network configured.
EXOS-31802 FAN OID returns only the first fan serial number.
EXOS-31811 ExtremeXOS should throw an error to disable SLPP before configuring VPEX when it is enabled.
EXOS-31919 Access VLAN traffic is not forwarded over MLAG ports toward the network VLAN.
EXOS-32016 MAC locking behavior was not consistent with MLAG.
EXOS-32033 Slot port wildcard does not work.
EXOS-32038 The temperature is incorrectly displayed in the show temperature command output.
EXOS-32055 RESTCONF: The switch doesn't respond to System API calls and the CPU stays high for hal and EXPY processes.
ExtremeSwitching X435 Series Switches
EXOS-31906 Switch stops transmitting power with a fault Overload to the AP port.
EXOS-31984 ExtremeXOS rescue with a USB on X435 8-port models is not working with 32.1 and 31.7 releases.
ExtremeSwitching 5420 Series Switches
EXOS-31477 The "Image integrity check" field in the show switch management command output is set to "Unknown."