The following issues were resolved in ExtremeXOS 31.7.1-Patch1-56. Release 31.7.1-Patch1-56 includes all fixes up to and including the following versions: 11.6.5.3 and earlier, 12.0.5, 12.1.7, 12.2.2-patch1-12, 12.3.6, 12.4.5, 12.5.5, 12.6.3, 12.6.5, 12.7.1, 15.1.5, 15.2.4, 15.3.3, 15.4.1, 15.5.1, 15.5.2, 15.6.1, 15.6.2, 15.7.1, 16.1, 16.1.2, 16.1.3, 21.1, 22.1, 22.2, 22.3, 22.4, 22.5, 22.6, 30.1, 30.2, 30.3, 30.4, 30.5, 30.6, 30.7, 31.1, 31.2, 31.3, 31.4, 31.5, 31.6, and 31.7. For information about those fixes, see the release notes for the specific release.
Release 31.7 also includes fixes for issues found in Switch Engine 31.6. Release 31.6 was the first version of Switch Engine.
| Defect Number | Description |
|---|---|
| General | |
| EXOS-32095 | Netlogin web-base URL redirection does not work when HTTP is disabled and HTTPS is enabled. |
| EXOS-32104 | When all the fans are removed and inserted, the status of all fans display the message "Operational at 0 RPM". |
| EXOS-32172 | Egress rate-limit does not work if max-burst-size is not specified |
| EXOS-32194 | An ACL process crash occurs when adding an l2pt profile in VPLS. |
| EXOS-32202 | The outer tag was removed when sending LLDP frames over L2PT. |
| EXOS-32204 | SNMP trap gets the wrong key after a switch restart. |
| EXOS-32213 | Process bcmASYNC crashes with signal 6 when the number of adjacencies exceeds the hardware limit. |
| EXOS-32280 | L3 Remote Mirror is not working when configured to capture packets on the VLAN interface. |
| EXOS-32301 | The switch sends overheat condition as an SNMPv1 trap despite a MIB files definition of SNMPV2. |
| EXOS-32328 | HTTPS Chalet login failure with the message soap error session failed when attempting to log in via the same tab. |
| EXOS-32466 | SLPP configurations are removed from the port but retained in the configuration when disabling the sharing on the port. |
| EXOS-32467 | XMC or XIQ Site Engine raises an alarm if a file named EXTRTEST exists with the TFTP server. |
| EXOS-32468 | ARP packets are not sent via the Standby slot when starting the stack with ports disabled. |
| EXOS-32475 | A PIM L3 cache miss occurs in ExtremeXOS FHR switches when the RP switch is from a different vendor. |
| EXOS-32495 | VPEX process crashes with signal 11, leading to a switch restart. |
| ExtremeSwitching 5520 Series Switches | |
| EXOS-32471 | An HAL error log occurs when upgrading an ExtremeSwitching 5520 with a 10504 Gbic. |