The following is a limitation in ExtremeXOS system architecture that has yet to be resolved.
Defect Number | Description |
---|---|
General | |
EXOS-32111 | Connecting a Cat5 or Cat6 Ethernet cable from an Ethernet switch access port to
the Console port on an active X465 or X695 switch may cause the switch to hang in a
boot cycle after reboot or power cycling the switch. Workaround: Ensure you connect the console port on the switch to the proper terminating equipment, for example, to a PC, VT terminal, terminal server, etc. |
ExtremeSwitching X460-G2 Series Switches | |
EXOS-32241 | With ExtremeXOS 32.1, an X460-G2 populated with a SyncE VIM-TM-CLK clock module will experience a HAL crash and reboot if the command show iproute reserved-entries statistics is entered. |
ExtremeSwitching X465 Series Switches | |
EXOS-31978 | The X465 VIM-4Y and VIM-2Y do not support Auto Negotiation or FEC. If you enable Auto Neg for these ports, a false link-up may occur even with no cable connected. |