Default ExtremeXOS Settings

The following table shows the default settings for ExtremeXOS starting with version 31.4, and shows any changes that have been made to these settings and in what version these changes were made.

Table 1. Default ExtremeXOS Settings
Feature 31.4 and earlier 31.5 31.6 and later
Account Lockout After 3 consecutive login failures, account is locked for 5 minutes. a
AVB Disabled.
BFD Strict Session Protection Disabled.
BGP Disabled.
Bluetooth Enabled.
BOOTP Relay Disabled.
CDP Enabled.
Configuration auto save Disabled.
Clear-flow Disabled.
Diagnostics Admin level privileges required to show diagnostics. a
DHCP Disabled.
DNS Cache Resolver and Analytics Disabled.
IPFIX Disabled.
IP NAT Disabled.
EAPS Disabled.
EDP Enabled on management port.
ELRP Disabled.
ESRP Disabled.
Extended Edge Switching (VPEX) Disabled.
ExtremeCloud IQ Enabled
FEC Disabled. Enabled on Native 25Gb ports.
Identity Management Disabled.
IGMP Enabled, set to IGMPv2 compatibility mode.
IGMP Snooping Enabled.
Image Integrity Check Disabled.
IP Route Compression Enabled.
ISIS Disabled.
LLDP Enabled.
Log Admin level privileges required to show log. a
Logging memory buffer Generate an event when the logging memory buffer exceeds 90% of capacity. a
MAC Security Disabled.
MLD Disabled.
MLD Snooping Disabled.
MPLS Disabled.
MSRP Disabled.
MSTP Enabled.
NetLogin All types of authentication are disabled.
NTP Disabled.
ONEPolicy Disabled.
Policy rule model Hierarchical (Unless upgrading from 30.5 with a saved configuration set to access list.)
OpenFlow Not supported.
OSPF Disabled.
OVSDB Disabled.
Passwords Plain text password entry not allowed. a
PIM Disabled.
PIM Snooping Disabled.

PoE

Fast PoE

Perpetual PoE

Enabled.

Disabled.

Disabled.

RADIUS Disabled for both switch management and network login.
RIP Disabled.
RMON Disabled. However, even in the disabled state, the switch responds to RMON queries and sets for alarms and events.
sFlow Disabled.
SNMP server Disabled. a
SSH Disabled.
Stacking-support Disabled, except for X450-G2, X465.
Stacking auto-discovery Enabled.
STP Enabled.
Syslog Disabled.
TACACS Disabled.
Telnet Disabled. a Enabled.
VPEX IP Multicast Replication Controlling Bridge
VPLS All newly created VPLS instances are enabled.
Watchdog Enabled.
Web HTTP server Enabled. a
Web HTTPS server Disabled. a

a If you choose enhanced security mode when initially setting up the switch or after running unconfigure switch all.