The following table shows supported limits for features in the Value Edge License.
| Metric | Product | Limit |
|---|---|---|
| AAA (local)—maximum number of admin and local user accounts. | ExtremeSwitching X435 | 16 |
| Access lists (meters)—maximum number of meters. | ExtremeSwitching X435 | 512 ingress |
| Access lists (policies)—suggested maximum number of lines in a single policy file. | ExtremeSwitching X435 | 300,000 |
| Access lists (policies)—maximum number of rules in a single policy file.a | ExtremeSwitching X435 |
1,024 ingress |
| Access lists (slices)—number of ACL slices. | ExtremeSwitching X435 | 8 ingress only |
| ACL Per Port Meters—number of meters supported per port. | ExtremeSwitching X435 | 8 |
| ACL port ranges | ExtremeSwitching X435 | 32 |
| Meters Packets-Per-Second Capable | ExtremeSwitching X435 | Yes |
| AVB (audio video bridging)—maximum number of active streams. | ExtremeSwitching X435 | 512 |
| BOOTP/DHCP relay—maximum number of BOOTP or DHCP servers per virtual router. | ExtremeSwitching X435 | 8 |
| BOOTP/DHCP relay—maximum number of BOOTP or DHCP servers per VLAN. | ExtremeSwitching X435 | 8 |
| BOOTP/DHCP relay—maximum number of DHCPv4/v6 relay agents. | ExtremeSwitching X435 | 30 |
| Connectivity fault management (CFM)—maximum number or CFM domains. | ExtremeSwitching X435 | 8 |
| CFM—maximum number of CFM associations. | ExtremeSwitching X435 | 256 |
| CFM—maximum number of CFM up end points. | ExtremeSwitching X435 | 32 |
| CFM—maximum number of CFM down end points. | ExtremeSwitching X435 | 32 |
| CFM—maximum number of CFM remote end points per up/down end point. | ExtremeSwitching X435 | 2,000 |
| CFM—maximum number of dot1ag ports. | ExtremeSwitching X435 | 128 |
| CFM—maximum number of CFM segments. | ExtremeSwitching X435 | 1,000 |
| CFM—maximum number of MIPs. | ExtremeSwitching X435 | 256 |
| DHCPv6 Prefix Delegation Snooping—Maximum number of DHCPv6 prefix delegation snooped entries. | ExtremeSwitching X435 | 30 (with static routes) |
| DHCP snooping entries—maximum number of DHCP snooping entries. | ExtremeSwitching X435 | 30 |
| Dynamic
ACLs—maximum number of ACLs processed per second. Note: Limits are load-dependent.
|
ExtremeSwitching X435
|
|
| EAPS domains—maximum number of EAPS domains. | ExtremeSwitching X435 | 4 |
| EAPSv1 protected VLANs—maximum number of protected VLANs. | ExtremeSwitching X435 | 1,000 |
| ERPS domains—maximum number of ERPS domains with or without CFM configured. | ExtremeSwitching X435 | 4 |
| ERPSv1 protected VLANs—maximum number of protected VLANs. | ExtremeSwitching X435 | 1,000 |
| ELSM (vlan-ports)—maximum number of VLAN ports. | ExtremeSwitching X435 | 2,000 |
| Forwarding rate—maximum L3 software forwarding rate. | ExtremeSwitching X435 | 7,844 pps |
| FDB (unicast blackhole entries)—maximum number of unicast blackhole FDB entries. | ExtremeSwitching X435 | 16,019 |
| FDB (multicast blackhole entries)—maximum number of multicast blackhole FDB entries. | ExtremeSwitching X435 | 16,384 |
| FDB (maximum L2 entries)—maximum number of MAC addresses. | ExtremeSwitching X435 | 16,384 g |
| FDB (maximum L2 entries)—maximum number of multicast FDB entries. | ExtremeSwitching X435 | 512 |
| Identity management—maximum number of Blacklist entries. | ExtremeSwitching X435 | 512 |
| Identity management—maximum number of Whitelist entries. | ExtremeSwitching X435 | 512 |
| Identity management—maximum number of roles that can be created. | ExtremeSwitching X435 | 64 |
| Identity management—maximum role hierarchy depth allowed. | ExtremeSwitching X435 | 5 |
| Identity management—maximum number of attribute value pairs in a role match criteria. | ExtremeSwitching X435 | 16 |
| Identity management—maximum number of child roles for a role. | ExtremeSwitching X435 | 8 |
| Identity management—maximum number of policies/dynamic ACLs that can be configured per role. | ExtremeSwitching X435 | 8 |
| Identity management—maximum number of LDAP servers that can be configured. | ExtremeSwitching X435 | 8 |
| Identity management—maximum number of Kerberos servers that can be configured. | ExtremeSwitching X435 | 20 |
| Identity management—maximum database memory size. | ExtremeSwitching X435 | 512 |
| Identity
management—recommended number of identities per switch.
Note: Number of identities per switch is for a default identity
management database size (512 Kbytes) across all platforms.
|
ExtremeSwitching X435 | 100 |
| Identity
management—recommended number of ACL entries per identity.
Note: Number of ACLs per identity, based on system ACL
limitation.
|
ExtremeSwitching X435 | 20 |
| Identity management—maximum number of dynamic ACL entries configured as an individual dynamic rule, or as an ACL entry in a policy file. | ExtremeSwitching X435 | 500 |
| IGMP snooping per VLAN filters—maximum number of VLANs supported in per-VLAN IGMP snooping mode. | ExtremeSwitching X435 | 500 |
| IGMPv2 subscriber—maximum number of IGMPv2 subscribers per port.n | ExtremeSwitching X435 | 2,500 |
| IGMPv2 subscriber—maximum number of IGMPv2 subscribers per switch.n | ExtremeSwitching X435 | 12,500 |
| IGMPv3 maximum source per group—maximum number of source addresses per group. | ExtremeSwitching X435 | 250 |
| IGMPv3 subscriber—maximum number of IGMPv3 subscribers per port.n | ExtremeSwitching X435 | 1,000 |
| IGMPv3 subscriber—maximum number of IGMPv3 subscribers per switch.n | ExtremeSwitching X435 | 10,000 |
| IP ARP entries
in software—maximum number of IP ARP entries in software.
Note: Might be limited by hardware capacity of FDB (maximum L2
entries).
|
ExtremeSwitching X435 | 20,424 |
| IPv4 ARP entries in hardware with minimum LPM routes—maximum recommended number of IPv4 ARP entries in hardware, with minimum LPM routes present. Assumes number of IP route reserved entries is 100 or less. | ExtremeSwitching X435 | 509 h |
| IPv4 ARP entries in hardware with maximum LPM routes—maximum recommended number of IPv4 ARP entries in hardware, with maximum LPM routes present. Assumes number of IP route reserved entries is “maximum.” | ExtremeSwitching X435 | 500 h |
| IPv4 remote hosts in hardware with zero LPM routes—maximum recommended number of IPv4 remote hosts (hosts reachable through a gateway) in hardware when LPM routing is not used. Assumes number of IP route reserved entries is 0, and number of IPv4 ARP entries present is 100 or less. | ExtremeSwitching X435 | 3,100 h |
| IPv4 routes—maximum number of static IPv4 routes in software (combination of unicast and multicast routes). | ExtremeSwitching X435 | 32 |
| IPv4 routes (LPM entries in hardware)— number of IPv4 routes in hardware. | ExtremeSwitching X435 | 32 |
| IPv6 addresses on an interface—maximum number of IPv6 addresses on an interface. | ExtremeSwitching X435 | 15 |
| IPv6 addresses on a switch—maximum number of IPv6 addresses on a switch. | ExtremeSwitching X435 | 15 |
| IPv6 host entries in hardware—maximum number of IPv6 neighbor entries in hardware. | ExtremeSwitching X435 | 500 |
| IPv6 routes in software—maximum number of static IPv6 routes in software. | ExtremeSwitching X435 | 16 |
| IPv6 routes (LPM entries in hardware)—maximum number of IPv6 routes in hardware. | ExtremeSwitching X435 | 16 |
| IP router interfaces—maximum number of VLANs performing IPv4 and/or IPv6 routing. Excludes sub-VLANs. | ExtremeSwitching X435 | 30 |
| IP unicast static routes—maximum number of permanent IP unicast routes. | ExtremeSwitching X435 | 32 |
| IP multinetting (secondary IP addresses)—maximum number of secondary IP addresses per VLAN. | ExtremeSwitching X435 | 30 |
| Jumbo frames—maximum size supported for jumbo frames, including the CRC. | ExtremeSwitching X435 | 9,216 |
| Layer-2 IPMC
forwarding caches—(IGMP/MLD/PIM snooping) in mac-vlan mode.
Note:
|
ExtremeSwitching X435 | 5,000 |
| Layer-3 IPv4
Multicast—maximum number of <S,G,V> entries installed
in the hardware (IP multicast compression enabled). Note:
|
ExtremeSwitching X435 | 1,500 |
| Layer-3 IPv6
Multicast—maximum number of <S,G,V> entries installed
in the hardware (IP multicast compression enabled). Note:
|
ExtremeSwitching X435 | 700 |
| Load
sharing—maximum number of load sharing groups. Note: The actual number of load-sharing groups that can
be configured is limited by the number of physical ports present in the switch or
SummitStack.
|
ExtremeSwitching X435 | 8 |
| Load sharing—maximum number of ports per load-sharing group. | ExtremeSwitching X435 (standalone only) | 8 |
| Logged messages—maximum number of messages logged locally on the system. | ExtremeSwitching X435 | 20,000 |
| MAC-based security—maximum number of MAC-based security policies. | ExtremeSwitching X435 | 1,024 |
| MAC Locking—Maximum number of MAC locking stations that can be learned on a port. | ExtremeSwitching X435 |
64 (static MAC locking stations) 600 (first arrival MAC locking stations) |
| Meters—maximum number of meters. | ExtremeSwitching X435 | 512 |
| Maximum mirroring instances. | ExtremeSwitching X435 | 1 (egress) |
| Mirroring
(filters)—maximum number of mirroring filters. Note: This is the number of filters across all the active mirroring
instances.
|
ExtremeSwitching X435 | 128 |
| Mirroring,
one-to-many (filters)—maximum number of one-to-many
mirroring filters. Note: This is the number of filters across all the active mirroring
instances.
|
ExtremeSwitching X435 | 128 |
| Mirroring, one-to-many (monitor port)—maximum number of one-to-many monitor ports. | ExtremeSwitching X435 | 1 |
| Multicast listener discovery (MLD) snooping per-VLAN filters—maximum number of VLANs supported in per-VLAN MLD snooping mode. | ExtremeSwitching X435 | 63 |
| Multicast listener discovery (MLD)v1 subscribers—maximum number of MLDv1 subscribers per port.n | ExtremeSwitching X435 | 2,500 |
| Multicast listener discovery (MLD)v1 subscribers—maximum number of MLDv1 subscribers per switch.n | ExtremeSwitching X435 | 12,500 |
| Multicast listener discovery (MLD)v2 subscribers—maximum number of MLDv2 subscribers per port.n | ExtremeSwitching X435 | 2,000 |
| Multicast listener discovery (MLD)v2 subscribers—maximum number of MLDv2 subscribers per switch.n | ExtremeSwitching X435 | 10,000 |
| Multicast listener discovery (MLD)v2 maximum source per group—maximum number of source addresses per group. | ExtremeSwitching X435 | 200 |
| Network Login—maximum number of clients being authenticated on MAC-based VLAN enabled ports. | ExtremeSwitching X435 | 1,024 |
| Network Login—maximum number of dynamic VLANs. | ExtremeSwitching X435 | 1,024 |
| Network Login VLAN VSAs—maximum number of VLANs a client can be authenticated on at any given time. | ExtremeSwitching X435 | 10 |
| Network Service Identifiers (NSI)/VLAN mappings—maximum number of VLANs to NSI mappings. | ExtremeSwitching X435 | 94 |
| ONEPolicy Roles/Profiles—maximum number of policy roles/profiles. | ExtremeSwitching X435 | 63 |
| ONEPolicy Rules per Role/Profile—maximum number of rules per role/policy. | ExtremeSwitching X435 |
IPv4 Rules: 128 L2 Rules: 56 |
| ONEPolicy
Authenticated Users per Switch—maximum number of
authenticated users per switch with TCI-Overwrite disabled. Note: The maximum values assume 75% utilization of VLAN-XLATE hash
table.
|
ExtremeSwitching X435 | 192 |
| ONEPolicy
Authenticated Users per Port per Switch— maximum number of
authenticated users per port per switch with TCI overwrite
disabled. Note: The maximum values assume 75% utilization of VLAN-XLATE hash
table.
|
ExtremeSwitching X435 | 187 |
| ONEPolicy Permit/Deny Traffic Classification Rules Types—total maximum number of unique permit/deny traffic classification rules types (system/stack). | ExtremeSwitching X435 | 184 |
| ONEPolicy Permit/Deny Traffic Classification Rules Types—maximum number of unique IPv4 permit/deny traffic classification rules (typesipsource / ipdest / ipfrag / udpsourceportIP / udpdestportIP / tcpsourceportIP / tcpdestportIP / ipttl / iptos / iptype). | ExtremeSwitching X435 | 128 |
| ONEPolicy Permit/Deny Traffic Classification Rules Types—maximum number of unique Layer 2 permit/deny traffic classification rules (ethertype/port). | ExtremeSwitching X435 | 56 |
| Policy-based routing (PBR) redundancy—maximum number of flow-redirects. | ExtremeSwitching X435 | 256o |
| Policy-based routing (PBR) redundancy—maximum number of next hops per each flow-direct. | ExtremeSwitching X435 | 32o |
| Private VLANs—maximum number of subscribers. Assumes a minimum of one port per network and subscriber VLAN. | ExtremeSwitching X435 | 15 |
| Private
VLANs—maximum number of private VLANs with an IP address on
the network VLAN. Note: This limit is dependent on the maximum number of private
VLANs in an L2-only environment if the configuration has tagged and translated ports.
|
ExtremeSwitching X435 | 15 |
| Private VLANs—maximum number of private VLANs in an L2-only environment. | ExtremeSwitching X435 | 15 |
| Route policies—suggested maximum number of lines in a route policy file. | ExtremeSwitching X435 | 10,000 |
| Spanning Tree (maximum STPDs)—maximum number of Spanning Tree Domains on port mode EMISTP. | ExtremeSwitching X435 | 16 |
| Spanning Tree
PVST+—maximum number of port mode PVST domains. Note: For all platforms, the maximum number of active ports per PVST
domain depends on the maximum number of spanning tree ports supported on given platform. For
example, on a switch that supports 256 PVST domains (maximum) and 4,096 STP ports (maximum),
the maximum number of active ports per PVST domain would be 16 ports (4,096 ÷ 256).
|
ExtremeSwitching X435 | 128 |
| Spanning Tree—maximum number of multiple spanning tree instances (MSTI) domains. | ExtremeSwitching X435 | 16 |
| Spanning
Tree—maximum number of VLANs per MSTI. Note: Maximum number of
10 active ports per VLAN when all 100 VLANs are in one
MSTI.
|
ExtremeSwitching X435 | 100 |
| Spanning Tree—maximum number of VLANs on all MSTP instances. | ExtremeSwitching X435 | 256 |
| Spanning Tree (802.1d domains)—maximum number of 802.1d domains per port. | ExtremeSwitching X435 | 1 |
| Spanning Tree (number of ports)—maximum number of ports including all Spanning Tree domains. | ExtremeSwitching X435 | 1,024 |
| Spanning Tree (maximum VLANs)—maximum number of STP-protected VLANs (dot1d and dot1w). | ExtremeSwitching X435 | 256 |
| SSH (number of sessions)—maximum number of simultaneous SSH sessions. | ExtremeSwitching X435 | 8 |
| Static MAC multicast FDB entries—maximum number of permanent multicast MAC entries configured into the FDB. | ExtremeSwitching X435 | 1,024 |
| Syslog servers—maximum number of simultaneous Syslog servers that are supported. | ExtremeSwitching X435 | 16 |
| Syslog targets—maximum number of configurable Syslog targets. | ExtremeSwitching X435 | 16 |
| Telnet (number of sessions)—maximum number of simultaneous Telnet sessions. | ExtremeSwitching X435 | 8 |
| Virtual routers—maximum number of user-created virtual routers that can be created on a switch. | ExtremeSwitching X435 | 16 (local-only VRs) |
| Virtual router
forwarding (VRFs)—maximum number of VRFs that can be created
on a switch. Note: * Subject to other system limitations.
|
ExtremeSwitching X435 | 16 (local-only VRFs) |
| VLAN aggregation—maximum number of port-VLAN combinations on any one superVLAN and all of its subVLANs. | ExtremeSwitching X435 | 1,000 |
| VLANs—includes all VLANs. | ExtremeSwitching X435 | 4,094 |
| VLANs (Layer 2)—maximum number of Layer 2 VLANs. | ExtremeSwitching X435 | 4,094 |
| VLANs (Layer 3)—maximum number of VLANs performing IPv4 and/or IPv6 routing. Excludes sub-VLANs. | ExtremeSwitching X435 |
IPv4: 30 IPv6: 15 |
| VLANs (maximum active port-based)—maximum active ports per VLAN when 1,000 VLANs are configured with default license. | ExtremeSwitching X435 | 28 |
| VLAN Port Interfaces (VPIF)—maximum number of VLAN port interfaces. | ExtremeSwitching X435 | 4,090 |
| VLANs (maximum active protocol-sensitive filters)—number of simultaneously active protocol filters in the switch. | ExtremeSwitching X435 |
16 |
| VLAN translation—maximum number of translation VLANs. Assumes a minimum of one port per translation and member VLAN. | ExtremeSwitching X435 | 15 |
| VLAN
translation—maximum number of translation VLAN pairs with an
IP address on the translation VLAN. Note: This limit is dependent on the maximum number of
translation VLAN pairs in an L2-only environment if the configuration includes tagged and
translated ports.
|
ExtremeSwitching X435 | 15 |
| VLAN translation—maximum number of translation VLAN pairs in an L2-only environment. | ExtremeSwitching X435 | 15 |
| VMAN CEP—maximum number of CVIDs. | ExtremeSwitching X435 | 192 |
| XML
requests—maximum number of XML requests per second. Note: Limits are dependent on load and type of XML request. These
values are dynamic ACL data requests.
|
ExtremeSwitching X435 | 10 with 100 DACLs |