The ExtremeSwitching 5320 Series is a family of feature-rich edge switches. The 5320 Series universal hardware provides end-to-end secure network segmentation, in addition to advanced policy capabilities, and offers a user-selectable choice of Fabric Engine and Switch Engine network operating system (NOS) personalities.
Fabric Engine 8.6 supports the following new switching models:
5320-24P-8XE
24 10/100/1000BASE-T full-duplex (FDX), half-duplex (HDX) ports with 802.3af Type 1 PoE and 802.3at Type 2 PoE+
8 10G SFP+ ports
All ports support MACsec.
Ports 29-32 support 100M, 1G, and 10G optics.
By default, ports 1/25-1/27 are reserved for internal loopback function when the switch operates in SPBM mode.
In non SPBM mode, ports 25-32 support 1G and 10G optics.
5320-24T-8XE
24 10/100/1000BASE-T full-duplex (FDX), half-duplex (HDX) ports
8 10G SFP+ ports
All ports support MACsec.
Ports 29-32 support 100M, 1G, and 10G optics.
By default, ports 1/25-1/27 are reserved for internal loopback function when the switch operates in SPBM mode.
In non SPBM mode, ports 25-32 support 1G and 10G optics.
5320-48P-8XE
48 10/100/1000BASE-T full-duplex (FDX), half-duplex (HDX) ports with 802.3af Type 1 PoE and 802.3at Type 2 PoE+
8 10G SFP+ ports
All ports support MACsec.
Ports 53-56 support 100M, 1G, and 10G optics.
By default, ports 1/49-1/51 are reserved for internal loopback function when the switch operates in SPBM mode.
In non SPBM mode, ports 49-56 support 1G and 10G optics.
5320-48T-8XE
48 10/100/1000BASE-T full-duplex (FDX), half-duplex (HDX) ports
8 10G SFP+ ports
All ports support MACsec.
Ports 53-56 support 100M, 1G, and 10G optics.
By default, ports 1/49-1/51 are reserved for internal loopback function when the switch operates in SPBM mode.
In non SPBM mode, ports 49-56 support 1G and 10G optics.
A future release will add support for the following two models, which are included in the current documentation:
5320-16P-4XE
16 10/100/1000BASE-T full-duplex (FDX), half-duplex (HDX) ports with 802.3af Type 1 PoE and 802.3at Type 2 PoE+
4 10G SFP+ ports
Powered by AC power source
All ports support MACsec.
5320-16P-4XE-DC
16 10/100/1000BASE-T full-duplex (FDX), half-duplex (HDX) ports with 802.3af Type 1 PoE and 802.3at Type 2 PoE+
4 10G SFP+ ports
Powered by DC power source
All ports support MACsec.
In addition to the fixed ports, all models provide console interface ports (one micro Type B USB and one RJ-45) and one Type A USB port for removable storage.
The 5320 Series family of switches have either 4 or 8 SFP+ ports:
All SFP+ ports support 1G and 10G speeds.
The last four SFP+ ports of the 24- and 48-port models also support 100M.
For optics compatibility, see the Extreme Optics website.
For 10G operation, you must install a port license.
For information about feature support, see Fabric Engine Feature Support Matrix and Fabric Engine User Guide.
Extreme Networks might announce support for additional optical components in the future. For a complete and current list of supported optical components, see the Extreme Optics website.
This release introduces 100 Mb support on 5520-24X switches.