Changing the Network Operating System

ExtremeSwitching Universal Hardware switches can run two different operating systems: Switch Engine (default) or Fabric Engine.

Making Your Initial Network Operating System Selection

You can make your initial selection of the operating system using manually during boot-up:

Bootloader—When you see the message Starting Default Bootloader ...Press and hold the <spacebar> to enter the bootrom, press and hold the space bar until the boot menu is displayed (you have 30 seconds):
```
*** 5320-48T-8XE Boot Menu ( 3.4.2.8 ) ***

     EXOS: Default
     EXOS: Primary 32.1.1.6
     EXOS: Secondary 32.1.1.6
     EXOS: Primary 32.1.1.6 with default configuration
     EXOS: Secondary 32.1.1.6 with default configuration
     EXOS: Rescue
     Change the switch OS to VOSS
     Run Manufacturing Diagnostics
     Update bootloader
     Reboot system
```
Use the up and down arrow keys to select Change the switch OS to VOSS, and then press Enter.

Note
The 5720, 7520, and 7720 Series use the GRUB menu. There is no need to press and hold the space bar. Use the up and down arrow keys to navigate the menu.
Safe defaults mode start-up menu—When the question Would you like to change the switch OS to VOSS? [y/N/q] is displayed:
- For Switch Engine, type N.
- For Fabric Engine, type y.

Changing Your Network Operating System

You can change your network operating system selection at any time.

Caution

Changing your network operating systems deletes all configuration files, debug information, logs, events, and statistics information of the previous network operating system.

Note

If you anticipate ever changing the operating system to Fabric Engine, and you want to statically assign IP addresses on the DHCP server, then it is recommended to assign them based on the DHCP client ID.

CLI Command—run the download [url url {vr vrname} | image [active | inactive] [[hostname | ipaddress] filename {{vr} vrname} {block-size block_size}] {partition} {install {reboot}} command specifying a VOSS image.
Note
Do not use the active, inactive, and partition options. They are not applicable for Fabric Engine.