Defects Closed With Code Changes
The following defect was closed with code
changes in this release of the software.
| Parent Defect ID: |
NPB-5988 |
Issue ID: |
NPB-5988 |
| Severity: |
S2 - Major |
| Product: |
NPB |
Reported in Release: |
NPB 21.1.2.4 |
| Symptom: |
SNMP GET request does not return response and the request
times out. |
| Condition: |
This issue was observed for an SNMP GET request with
multiple Object Identifiers (OIDs) to 9920. |
| Parent Defect ID: |
NPB-5992 |
Issue ID: |
NPB-5992 |
| Severity: |
S3 - Moderate |
| Product: |
NPB |
Reported in Release: |
NPB 21.1.2.4 |
| Symptom: |
Line card moves to the faulty state if
one of the QSFP 3/11 heats up, and BMC turns the power off to that LC.
The line card needs to be manually powered on using the system
slotoff/sloton commands. The hotswap of LC also works.
|
| Condition: |
This issue was observed when the QSFP temperature in one
of the slots went beyond the critical temperature. |
| Parent Defect ID: |
NPB-5993 |
Issue ID: |
NPB-5993 |
| Severity: |
S3 - Moderate |
| Product: |
NPB |
Reported in Release: |
NPB 21.1.2.4 |
| Symptom: |
Host name of 9920 does not appear in the XCO GUI |
| Condition: |
After reboot of 9920, configured hostname does not appear
in the XCO GUI. |
