The following issues were resolved in Switch Engine 32.6.1. Version 32.6.1 includes all fixes up to and including versions 31.6, 31.7, 32.1, 32.2, 32.3, 32.4, 32.5, and 32.6.
Defect Number | Description |
---|---|
General | |
CFD-9513 | extremeOverheat traps are sent continuously despite device the temperature being below the threshold. |
EXOS-31724 | In a stack setup, the Primary and Backup slots have different default FEC
settings. Example: For 25G SFP28 ports in the stack, the default FEC setting on the Primary node is enabled, while the default on the Backup is disabled. |
EXOS-33062 | Known multicast packets, such as mDNS, LLMNR, and UPnP, are getting looped in EAPS and STP environments after upgrading the switches to version 32.2. |
EXOS-33378 | Added the ability to configure the 10338 (10G BASE-T SFP+ 30m TAA) transceiver
and corresponding switch port to run at 1000BASE-T mode where applicable. The following switch models are supported: 5420F-24S-4XE 5520-48SE 5520-48SE-ACDC 5520-24X 5520-24X-ACDC 7520-48Y (QSFP28 ports need channelization with QSA adapter) 7720-32C |
EXOS-33882 | Enabling VRRP Fabric Routing shouldn't be allowed on a VRRP group when a group member has priority 255. |
EXOS-33894 | With the STP auto-edge feature, a port is detected as an "Edge" port but shown as "point-to-point". |
EXOS-34000 | The global-rule option in the CLEAR-Flow ACL is not working. |
EXOS-34001 | UPM profile event lost after switch restart. |
EXOS-34006 | Inconsistent behavior with the disable/enable snmp traps identity-management command in the configuration. |
EXOS-34030 | This IP-Security SNMP trap for a rogue DHCP server violation displays the IP address of the DHCP server in the reverse order. |
EXOS-34034 | The last port of a VLAN can't be deleted using SNMP. |
SummitStack | |
EXOS-31554 | Default configuration for non-primary slots are shown under normal configuration. |