show hardware profile

Displays details of the current active hardware profile, with options to filter by TCAM profile, counter profile, or LAG profile.

Syntax

show hardware profile cam-share
show hardware profile counters { counter-profile-1 | counter-profile-2 | counter-profile-3 | counter-profile-4 | default }
show hardware profile current [ usage ]
show hardware profile etcam { default | ipv4-v6-route | ipv6-route }
show hardware profile lag { default | lag-profile-1 }
show hardware profile tcam { app-telemetry | border-routing | default | layer2-ratelimit | multicast-profile | vxlan-visibility }

Parameters

cam-share
( SLX 9540 or SLX 9640) Specifies cam-share information.
counters
( SLX 9540 or SLX 9640) Specifies hardware resources for counter profiles.
counter-profile-1
Specifies resources optimized for Ingress ACL, OF, and Egress ACL, with forward and drop counting for Layer 4 ingress traffic.
counter-profile-2
Specifies resources optimized for OF, MPLS, VPLS, VLL, and MCT, with hit counting for Layer 4 ingress traffic.
counter-profile-3
Specifies resources optimized for MPLS, VPLS, VLL, MCT, with hit counting for Layer 4 ingress traffic.
counter-profile-4
Specifies resources optimized for Layer 4 traffic, with forward and drop counting for all Layer 4 ingress traffic.
default
Specifies resources optimized for VLAN and BD local switching, and MCT, with hit counting for Layer 4 ingress and egress traffic.
current
Displays current active running profile information.
usage
Displays usage information for the current active profile.
etcam
( SLX 9640 only) Specifies hardware resources for external TCAM (ETCAM) profiles.
default
Displays the details of the default ETCAM.
ipv4-v6-route
Displays the details of the ETCAM ipv4-v6-route.
ipv6-route
Displays the details of the ETCAM ipv6-route.
lag
( SLX 9540 or SLX 9640) Specifies hardware resources for link aggregation (LAG) profiles.
default
Specifies the default profile.
lag-profile-1
Specifies a modified LAG profile.
tcam
( SLX 9540 or SLX 9640) Specifies hardware resources for TCAM profiles.
app-telemetry
Optimizes resources for application telemetry.
border-routing
Optimizes resources for BGP Flowspec, ACLs, and so forth.
default
Optimizes resources with basic support for all applications.
layer2-ratelimit
Optimizes resources for Layer 2 ACL egress rate-limiting and related applications.
multicast-profile
Optimizes resources for IPv6 multicast. Layer 2 is also supported.
vxlan-visibility
Optimizes resources for VXLAN transit and termination, and GRE tunnel.

Modes

Privileged EXEC mode

Usage Guidelines

If the profile counters are changed from default to counter-profile-# and the statistics-based encapsulations are not available, then the LSPs that need statistics will not be brought up (either due to exhaustion or due to activating a counter profile that does not support statistics).

You can check if the statistics-based encapsulations are needed by using the show run router mpls policy command to see if statistics are enabled in MPLS. LSPs that have auto-bandwidth configured and bridge-domains that have statistics configured also need statistics-based encapsulations.

In case statistics are enabled, the LSPs and bridge-domains stay down. In the case of LSPs, the show mpls lsp {detail | extensive | name <lsp name>} command displays, "Statistics not available" in the down reason code.

Examples

The following example displays details of the current active hardware profile. 

device# show hardware profile current
 switch type: BR-SLX9540

                       current TCAM profile:    DEFAULT
                                     l2-acl:    2038
                                   l3v4-acl:    6134
                                   l3v6-acl:    6134
                             l3v4-acl-vxlan:    0
                                   l2l3v4Of:    0
                                  egrl2-acl:    2038
                                  egrl3-acl:    2038
                                    l3v6-of:    0
                                   Flex-acl:    0
                                App_tel_acl:    0
_________________________________________________________________

                  current SLX ROUTE profile:    ROUTE-DEFAULT
                                      hwopt:    Disabled
                                  v4FibComp:    Disabled
                                  v6FibComp:    Disabled
                                   multivrf:    Disabled
________________________________________________________________
                       current LAG  profile:    LAG-DEFAULT
                                    max-lag:    64
_________________________________________________________________

                   current COUNTERS profile:    COUNTERS-PROFILE-1
                           InLIF - HitCount:    32768
                             InL4 - FwdDrop:    8192
                          OutLIF - HitCount:    0
                            OutL4 - FwdDrop:    8192
_________________________________________________________________

                          current CAM Share:    
                                   l2In-acl:    no
                                 l3v4In-acl:    no
                                   l3v4-pbr:    no
                                 l3v6In-acl:    no
                                   l3v6-pbr:    no
                                       Ofv4:    no
                                     Ofl3v6:    no

The following example displays details of the default counters profile. 

device# show hardware profile counters default
 switch type: BR-SLX9540

                           COUNTERS profile:    COUNTERS-DEFAULT
                           InLIF - HitCount:    32768
                            InL4 - HitCount:    16384
                          OutLIF - HitCount:    16384
                           OutL4 - HitCount:    0
_________________________________________________________________

The following example displays information about a specific LAG profile. 

device# show hardware profile lag lag-profile-1

 switch type: BR-SLX9540

                               LAG  profile:    LAG-PROFILE-1
                                    max-lag:    64

The following example displays information about a specific TCAM profile. 

device# show hardware profile tcam layer2-optimised-1 

 switch type: BR-SLX9540

                               TCAM profile:    LAYER2-OPT-1
                                     l2-acl:    6134
                                   l3v4-acl:    6134
                                   l3v6-acl:    2038
                             l3v4-acl-vxlan:    0
                                   l2l3v4Of:    0
                                  egrl2-acl:    1014
                                  egrl3-acl:    1014
                                    l3v6-of:    0
                                   Flex-acl:    0
                                App_tel_acl:    0

The following example displays information about profile etcam default, ipv4-v6-route and ipv6 route. 

device# show hardware profile etcam default
switch type: BR-SLX9640

                              ETCAM profile:    DEFAULT
                                ipv4-routes:    4000000
                                ipv6-routes:    256000
_________________________________________________________________

device# show hardware profile etcam ipv4-v6-route
switch type: BR-SLX9640

                              ETCAM profile:    IPV4-V6-ROUTE
                                ipv4-routes:    4000000
                                ipv6-routes:    700000
_________________________________________________________________

device# show hardware profile etcam ipv6-route

switch type: BR-SLX9640

                              ETCAM profile:    IPV6-ROUTE
                                ipv4-routes:    1000000
                                ipv6-routes:    1000000
_________________________________________________________________
9036284-00 Rev AA