Applies Converged Enhanced Ethernet (CEE) maps on a target interface. CEE maps can be applied to Layer 2 interfaces (physical switch interfaces), Layer 2 Port-channels, MCT Client Interfaces and ICL links . CEE maps cannot be applied to Physical or Logical Layer 3 interfaces and Tunnel interfaces.
Layer 2 interfaces (physical switch interfaces), Layer 2 Port-channels, MCT Client Interfaces and ICL links. CEE maps cannot be applied to Physical or Logical Layer 3 interfaces and Tunnel interfaces.
The no form of this command removes the CEE policy applied to the current interface.
This example shows the default CEE map being applied to the interface Ethernet 0/1.
device# configure terminal
device(config)# interface Ethernet 0/1
device(conf-if-eth-0/1)# cee default
device(conf-if-eth-0/1)#
The following is the response received from the remote peer if the CEE maps are not synchronized.
device(config-Port-channel-10)# cee default
2021/03/16-10:14:45, [ONMD-1005], 845, DCE, INFO, NH-Leaf3, Feature Mismatch: ETS unmatch at Ethernet 0/33 (pri: 0x0), will re-negotiate.
NH-Leaf3(config-Port-channel-10)# 2021/03/16-10:14:46, [ONMD-1005], 846, DCE, INFO, NH-Leaf3, Feature Mismatch: ETS unmatch at Ethernet 0/33 (pri: 0x0), will re-negotiate.
2021/03/16-10:14:46, [ONMD-1005], 847, DCE, INFO, NH-Leaf3, Feature Mismatch: PFC mismatch at Ethernet 0/33 (local 0x8 remote 0x0), will re-negotiate.
NH-Leaf3(config-Port-channel-10)# 2021/03/16-10:14:47, [ONMD-1005], 848, DCE, INFO, NH-Leaf3, Feature Mismatch: ETS unmatch at Ethernet 0/33 (pri: 0x0), will re-negotiate.
2021/03/16-10:14:47, [ONMD-1005], 849, DCE, INFO, NH-Leaf3, Feature Mismatch: PFC mismatch at Ethernet 0/33 (local 0x8 remote 0x0), will re-negotiate.
2021/03/16-10:14:56, [ONMD-1005], 850, DCE, INFO, NH-Leaf3, Feature Mismatch: ETS unmatch at Ethernet 0/33 (pri: 0x0), will re-negotiate.