router/pim

Resource URIs

URI Description
<base_URI>/config/running/router/pim/ Configures basic global protocol-independent multicast (PIM) Sparse parameters on a device within the PIM Sparse domain.
GET URIs Description
<base_URI>/config/running/router/pim/ Basic global protocol-independent multicast (PIM) Sparse parameters on a device within the PIM Sparse domain.
<base_URI>/config/running/router/pim/max-mcache Maximum multicast cache size.
<base_URI>/config/running/router/pim/hello-interval Sets the frequency with which the device sends PIM hello messages to its neighbors.
<base_URI>/config/running/router/pim/prune-wait Configures the time interval to wait for an override before pruning.
<base_URI>/config/running/router/pim/nbr-timeout Sets neighbor timeout.
<base_URI>/config/running/router/pim/inactivity-timer Sets inactivity interval.
<base_URI>/config/running/router/pim/message-interval Sets periodic join/prune message interval.
<base_URI>/config/running/router/pim/spt-threshold Sets threshold for switching to shortest-path-tree.
<base_URI>/config/running/router/pim/rpf Reverse path to the source.
<base_URI>/config/running/router/pim/rpf/ecmp Multicast ECMP load sharing.
<base_URI>/config/running/router/pim/rpf/ecmp/rebalance Multicast ECMP load sharing with dynamic rebalancing.
<base_URI>/config/running/router/pim/ssm-enable Enables SSM mode for PIM.
<base_URI>/config/running/router/pim/ssm-enable/range Sets the multicast address range to use for SSM.
<base_URI>/config/running/router/pim/bsr-candidate Sets candidate bootstrap router.
<base_URI>/config/running/router/pim/rp-candidate Configures candidate rendezvous point (RP).
<base_URI>/config/running/router/pim/anycast-rp Sets Anycast RP address and peers.
<base_URI>/config/running/router/pim/rp-address Configures a device interface as a rendezvous point (RP).
<base_URI>/config/running/router/pim/rp-address/{IP-address}/prefix-list Configures a device as a candidate rendezvous point (RP) for all multicast groups with the prefix 224.0.0.0/4, by default, and explicitly adds or deletes groups with other prefixes.
<base_URI>/config/running/router/pim/route-precedence Specifies Route Selection criteria.

Usage Guidelines

GET, POST, PUT, PATCH, DELETE, OPTIONS, and HEAD operations are supported.

Examples

URI

The following example uses the GET option to retrieve the configuration details.

http://host:80/rest/config/running/router/pim

None

<pim xmlns="urn:brocade.com:mgmt:brocade-pim" xmlns:y="http://brocade.com/ns/rest" y:self="/rest/config/running/router/pim">
  <max-mcache>24000</max-mcache>
  <hello-interval>10</hello-interval>
  <prune-wait>10</prune-wait>
  <message-interval>30</message-interval>
  <spt-threshold>0</spt-threshold>
  <rpf y:self="/rest/config/running/router/pim/rpf">
    <ecmp y:self="/rest/config/running/router/pim/rpf/ecmp">
      <rebalance>true</rebalance>
    </ecmp>
  </rpf>
  <bsr-candidate y:self="/rest/config/running/router/pim/bsr-candidate">
    <interface y:self="/rest/config/running/router/pim/bsr-candidate/interface/loopback%2C3">
      <bsr-cand-intf-type>loopback</bsr-cand-intf-type>
      <bsr-cand-intf-id>3</bsr-cand-intf-id>
    </interface>
  </bsr-candidate>
  <rp-candidate y:self="/rest/config/running/router/pim/rp-candidate">
    <interface y:self="/rest/config/running/router/pim/rp-candidate/interface/loopback%2C3">
      <rp-cand-intf-type>loopback</rp-cand-intf-type>
      <rp-cand-intf-id>3</rp-cand-intf-id>
    </interface>
    <prefix y:self="/rest/config/running/router/pim/rp-candidate/prefix/pre1">
      <rp-cand-prefix-name>pre1</rp-cand-prefix-name>
    </prefix>
  </rp-candidate>
  <anycast-rp y:self="/rest/config/running/router/pim/anycast-rp/1.1.1.1">
    <anycast-ip-addr>1.1.1.1</anycast-ip-addr>
  </anycast-rp>
  <rp-address y:self="/rest/config/running/router/pim/rp-address/135.135.135.135">
    <rp-ip-addr>135.135.135.135</rp-ip-addr>
  </rp-address>
  <route-precedence y:self="/rest/config/running/router/pim/route-precedence">
    <uc-default>true</uc-default>
    <uc-non-default>true</uc-non-default>
  </route-precedence>
</pim>