dot1x

Configures, retrieves, and modifies 802.1X authentication.

Resource URIs


URI	Description
/restconf/data/brocade-dot1x:dot1x	Configures 802.1X authentication.


GET URIs	Description
/restconf/data/brocade-dot1x:dot1x	IEEE 802.1X port-based access control.
/restconf/data/brocade-dot1x:dot1x/enable	Enables global port authentication.
/restconf/data/brocade-dot1x:dot1x/test	Configures 802.1X readiness check.
/restconf/data/brocade-dot1x:dot1x/timeout	Configures timeout for dot1x readiness check


PATCH URIs	Payload	Description
/restconf/data/brocade-dot1x:dot1x	<dot1x><enable>(enumeration)</enable></dot1x>	Configures IEEE 802.1X port-based access control and enables global port authentication.
/restconf/data/brocade-dot1x:dot1x/test	<test><timeout>{dot1x-readinesstest-timeout-interval}</timeout></test>	Configures timeout for dot1x readiness check.


PUT URIs	Payload	Description
/restconf/data/brocade-dot1x:dot1x/enable	<enable>(enumeration)</enable>	Enables global port authentication.
/restconf/data/brocade-dot1x:dot1x/timeout	<timeout>{dot1x-readinesstest-timeout-interval}</timeout>	Configures timeout for dot1x readiness check.


DELETE URIs
/restconf/data/brocade-dot1x:dot1x/enable
/restconf/data/brocade-dot1x:dot1x/timeout

Parameters

test timeout: Specifies the readiness test interval value in seconds. Valid values range from 1 through 65535. The default readiness test interval is 10 seconds.

Usage Guidelines

GET, POST, PUT, PATCH, DELETE, OPTIONS, and HEAD operations are supported.

Examples

URI

The following example uses the GET option to retrieve the configuration details.

http://host:443/restconf/data/brocade-dot1x:dot1x

None

<dot1x xmlns="urn:brocade.com:mgmt:brocade-dot1x">
						<timeout>
							<tx-period>%dot1x-tx-timeout-interval%</tx-period>
						</timeout>
					</dot1x>

URI

The following example uses the PATCH option to configure dot1x.

http://host:443/restconf/data/brocade-dot1x:dot1x

<dot1x><enable>true</enable></dot1x>

None

URI

The following example uses the DELETE option to remove dot1x.

http://host:443/restconf/data/brocade-dot1x:dot1x/enable

None