rbridge-lag/load-balance

Usage

<load-balance-lag xmlns="urn:brocade.com:mgmt:brocade-rbridge-lag">
	<load-balance>
		<hash>
			<ethernet>
				<sa-mac/>
				<da-mac/>
				<vlan/>
				<etype/>
				<smac-dmac/>
			</ethernet>
			<ip>
				<src-l4-port/>
				<dst-l4-port/>
				<src-ip/>
				<dst-ip/>
				<protocol/>
				<sip-dip/>
			</ip>
			<ipv6>
				<ipv6-src-l4-port/>
				<ipv6-dst-l4-port/>
				<ipv6-src-ip/>
				<ipv6-dst-ip/>
				<ipv6-next-hdr/>
				<sipv6-dipv6/>
			</ipv6>
			<l4>
				<src-dst-port/>
			</l4>
			<mpls>
				<label1>
				<label2>
				<label3>
				<all-labels/>
			</mpls>
		</hash>
	</load-balance>
<load-balance-lag>

Parameters

ethernet

Configures the various ethernet hash settings.

da-mac: Specifies Layer 2 Destination Mac Address.
etype: Specifies the etype option.
sa-mac: Specifies Layer 2 Source Mac Address.
vlan: Specifies the VLAN option.
smac-dmac: Specifies the source and destination MACs of the inner and outer headers.

ip

Configures the various IP hash settings.

dst-ip: Specifies the destination IP address.
dst-l4-port: Specifies the destination Layer 4 port.
protocol: Specifies the IP Protocol.
sip-dip: Specifies the IPv4 Source IP and IPv4 Destination IP addresses of the inner and outer headers.
src-ip: Specifies the source IP address.
src-l4-port: Specifies the source's Layer 4 port.

ipv6

Configures the various IPv6 hash settings.

ipv6-dst-ip: Specifies the destination IPv6 address.
ipv6-dst-l4-port: Specifies the destination IPv6 Layer 4 port.
ipv6-next-hdr: Specifies the next IPv6 header.
sipv6-dipv6: Specifies IPv6 Source IP and IPv6 Destination IP addresses.
ipv6-src-ip: Specifies the source IPv6 address.
ipv6-src-l4-port: Specifies the source IPv6 Layer 4 port.

l4

Configures the Layer 4 hash settings.

src-dst-port: Specifies the Layer 4 source and destination ports.

mpls

Configures the MPLS hash settings. (Not supported for SLX 9150 or SLX 9250 devices)

label1: Specifies MPLS label 1.
label2: Specifies MPLS label 2.
label3: Specifies MPLS label 3.
all-labels: Specifies all MPLS labels.

Support Matrix

The following table list the support of the Load Balancing Hash configurations on various SLX-OS devices.

Table 1. Support Matrix
Command	Supported In	Not Supported In
load-balance hash ethernet etype load-balance hash ethernet vlan	All platforms	None
load-balance hash ethernet da-mac load-balance hash ethernet sa-mac	Extreme 8720 Extreme 8520 SLX 9640 SLX 9540 SLX 9250 SLX 9150	Extreme 8820 SLX 9740
load-balance hash ethernet smac-dmac	Extreme 8820 SLX 9740	All other platforms
load-balance hash ip protocol	All platforms	None
load-balance hash ip dst-ip load-balance hash ip dst-l4-port load-balance hash ip src-ip load-balance hash ip src-l4-port	Extreme 8720 Extreme 8520 SLX 9640 SLX 9540 SLX 9250 SLX 9150	Extreme 8820 SLX 9740
load-balance hash ip sip-dip	Extreme 8820 SLX 9740	All other platforms
load-balance hash ipv6 ipv6-next-hdr	All platforms	None
load-balance hash ipv6 ipv6-dst-ip load-balance hash ipv6 ipv6-dst-l4-port load-balance hash ipv6 ipv6-src-ip load-balance hash ipv6 ipv6-src-l4-port	Extreme 8720 Extreme 8520 SLX 9640 SLX 9540 SLX 9250 SLX 9150	Extreme 8820 SLX 9740
load-balance hash ipv6 sipv6-dipv6	Extreme 8820 SLX 9740	All other platforms
load-balance hash l4 src-dst-port	Extreme 8820 SLX 9740	All other platforms
load-balance hash mpls label1 load-balance hash mpls label2 load-balance hash mpls label3	SLX 9540 SLX 9640	All other platforms
load-balance hash mpls all-labels	Extreme 8820 SLX 9740	All other platforms