Create the EAPS shared ports,
which are used to connect a common-link between the aggregate switches.
On the first switch, define the shared port mode
as partner, and define the link ID. Repeat this step on the other aggregate switch, but
configure the shared port mode as controller. The link ID matches the value configured for
the partner.
The following shows an example configuration for
the
partner:
* AGG-SWITCH#2.37 # create eaps shared-port 2:1
* AGG-SWITCH#2.38 # configure eaps shared-port 2:1 mode partner
* AGG-SWITCH#2.39 # configure eaps shared-port 2:1 link-id 21
