Disables all or part of selective forwarding by deleting ports from the ESRP-aware port list.
domain | Specifies an ESRP domain name. |
all | Specifies that all of the ports are to be disabled. |
port_list | Specifies the ports to be disabled from the ESRP-aware port list. |
group number | Specifies the ESRP group within the given domain name |
The group number defaults to '0'.
By configuring selective forwarding, you create an ESRP-aware port list of only those ports that forward to the ESRP groups that are associated with an ESRP-aware This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.. That port list is used for forwarding ESRP PDUs from the selected ports only of an ESRP-aware switch.
Use this command to delete one or more or all of the ports from an ESRP-aware port list. Deleting all of the ports puts the domain back to the default state.
The following command configures esrp domain (d1) to exclude ESRP PDUs on ports 5:1, 5:2, and 6:2.
configure esrp d1 aware delete selective-forward-ports 5:1,5:2,6:2 group 0
This command was first available in Extreme XOS 12.0.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.