Mounting to a wall

About this task

You can mount the SA201 adapter using the wall mount keyholes in the back of the unit. The keyholes are bidirectional and let the adapter to be mounted in either direction. To mount the SA201 adapter to a wall:
Click to expand in new window
Tools required
Table 1. Tools Required to mount to a wall
Number Description
1 Flat-head screwdriver
2 M4 screws and wall anchors
3 ESD-protective wrist strap (purchased separately)

Procedure

  1. Mark the two hole centers. The two screw centers should be 3.6” apart.
  2. For drywall/plasterboard walls, when using plastic anchors, drill two holes using a drill bit of 6mm or 1/4” diameter.
  3. For wood walls, when using only wood screws, drill two holes using a drill bit of 3mm or 1/8” diameter.
  4. Screw in the respective screws into the holes.
  5. Attach the SA201 adapter to the screws.
    Click to expand in new window
    Mounting the SA201 adapter to a wall
  6. Rock it back and forth to ensure that the unit is secured in place.
  7. Connect the LAN cables.
9035973-02