Assigning Ports to VLANs

Assigning tagged and untagged ports to a VLAN is simple and quick with Chalet.

  1. To begin, select Configure > VLAN, and then click the Graphics/arrow.png next to the VLAN you wish to assign ports to.
    The General tab displays.
  2. Select the Assign Ports tab, and then select the Edit checkbox. This stops the refresh timer so the switch will not update during this configuration.
    The Available Ports list and buttons become active.
    Click to expand in new window
    Graphics/vlan-tagging.png
  3. Select the check boxes next to the ports you wish to assign, and then click Add Tagged or Add Untagged
    The ports move to the "Assigned Ports" area on the right.
  4. To remove ports from the VLAN, select the ports from the Assigned Ports area and then click Remove.
  5. When finished, clear the Edit checkbox to restart the refresh timer.
  6. Click Save Config to save your changes.
  7. To confirm that your changes have been made to the switch, click Graphics/arrow_black.png.
    You are directed to the Port Details page.
  8. Click the VLAN tab to see that the Member VLANs field has been updated.
To enable DHCP on the assigned ports, refer to Enabling DHCP.