Overview

The AP3912i (WS-AP3912-FCC/ROW) is a wall-plate 11ac Wave 2 access point (AP) that lets you extend your wireless LAN and deploy local Wi-Fi while still providing extension for wired clients from the same Ethernet jack. This fully-featured AP plugs into existing Ethernet cabled wall plates. The AP provides application visibility, control, and policy support over three radios and three wired LAN ports. Wireless and wired traffic can be assigned application-level policy at the access point. The AP3912i provides flow-based data handling for wireless and wired connections in a single plug-and-play package. There is minimal or no impact to the existing infrastructure.

Three client ports are electrically connected to the AP board (internal switch). The PSE port can provide PoE (Power over Ethernet) (802.3af), which allows you to directly power devices such as iPhones and IP cameras. A pass-through port uses PoE that is provided by the switch directly, not from the AP. The pass-through port can be used to directly expose an additional switch port from the same jack. No additional power supply is needed.

Additional features:

• Supports the 802.11ac and 802.11n wireless standards, with full backward compatibility with legacy 802.11abg.
• Has two concurrent Wi-Fi radios, one 5GHz 2x2 11ac radio and one 2.4GHz 2x2 11n. One radio can operate as a Bluetooth or 802.15.4 radio.
• Interoperates fully with Wireless LAN, including support for VoWLAN, branch office mode, guest services, RTLS, availability, and mobility.
• Is enabled for ExtremeCloud™ support.